Rocker Switch Block-outs

[Sebulba]

Hello all,

Last night I started taking out some of the unused Dash Switches in My D3.

I am, of course left with holes in the dash panel.  I sure would like to get some of those block-outs, that I could put in the holes and make it look nicer.  The hole are 1 1/8 inches by 3/4 inch.

I checking with Mouser Electronics and got no love.

Any ideas?

Thanks

Seb

[richard5933]

Will these work: https://www.amazon.com/Rocker-Switch-AutoEC-Automotive-Bracket/dp/B0756CHJ27/ref=sr_1_1_sspa?crid=2SMESVZQIR82D&keywords=rocker+switch+blank+insert&qid=1645826167&sprefix=rocker+switch+blank%2Caps%2C122&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExMEtZUUY2NEY3S0xPJmVuY3J5cHRlZElkPUEwMDU0MjY5MzZVRjVTRjdWWEc4NyZlbmNyeXB0ZWRBZElkPUEwNTAxODYzMlJHOTkwRTREWEYwRSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

[Sebulba]

Will these work: https://www.amazon.com/Rocker-Switch-AutoEC-Automotive-Bracket/dp/B0756CHJ27/ref=sr_1_1_sspa?crid=2SMESVZQIR82D&keywords=rocker+switch+blank+insert&qid=1645826167&sprefix=rocker+switch+blank%2Caps%2C122&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExMEtZUUY2NEY3S0xPJmVuY3J5cHRlZElkPUEwMDU0MjY5MzZVRjVTRjdWWEc4NyZlbmNyeXB0ZWRBZElkPUEwNTAxODYzMlJHOTkwRTREWEYwRSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Something like that is what I'm looking for, but the hole size is 3/4 inch by 1 1/8 inch.  Those are too big.

I will look around amazon and see if I can find something now that I have better search terms.

Thanks

Seb

[chessie4905]

Check a school bus parts supplier. Some of those early switch sizes were common on 
school buses too.

[epretot]

I'm planning to change all of my switches. If I do, I will send you my blanks. I have 4.

I want to install toggles.

[Sebulba]

I'm planning to change all of my switches. If I do, I will send you my blanks. I have 4.

I want to install toggles.

Hello eprelot,

I really appreciate the offer.  I needed light 10 of them, so I just cut a piece of plastic and glued it to the back of the holes.  It keeps the dirt out and looks pretty good too.

Seb