New to forum, MCI question

[lvmci]

Hi Dave, here is a company that makes CDs for different buses. Won't give info for post bus she'll company builds, but will give loads of info from the manufacturer.  Luke and Criss Newton do have some paper books, and there are more, lvmci...
PS name and number is on the CD in the picture...

[Jim Blackwood]

Do you have the full and untrimmed schematics for the '96 102DL3?

Jim

[seafarer]

When I got my paper manual I made 3 copies of the wiring diagrams. 1 for rolling up and putting in my pocket when working on electrics (so I could draw and write on it as well as make notes and record measurements), 1 for highlighting and troubleshooting, and 1 for recording modifications and removal of wires and equipment. Then kept the originals intact in case I needed to make new copies from it.
FWIW
Seafarer

[roadkill]

Thanks for all the replies, I have been slowly getting together everything to start working, but have been lazy due to the heat.  New bulbs are certainly on my list, I am thinking about 24v LED unless there is reason to not use them.  However I am assuming that LED will not work on the turn signals?

[thomasinnv]

Thanks for all the replies, I have been slowly getting together everything to start working, but have been lazy due to the heat.  New bulbs are certainly on my list, I am thinking about 24v LED unless there is reason to not use them.  However I am assuming that LED will not work on the turn signals?

You can use led for turn signals with a solid state flasher. Your bus may already have a solid state flasher.