stud piloted studs and nuts

[sledhead]

I looked but could not find any thing ?
I have 1 outer stud and nut that is stripped and want the # so I can look it up to compare with what I have . This is for the drive axle with the right hand thread on the passenger side . I have a steel inner rim and aluminum outer wheel

like this ....same but different ? and nut as well

https://www.truckspring.com/products/Inner-Cap-Wheel-Nut-1516-12-Thread-300-inch-long-Right__13-3010R.aspx

thanks   dave 

[buswarrior]

None of the truck repair places in town have them on the shelf?

Happy coaching!
Buswarrior

[Dave5Cs]

Dave don't know if this is the right size but a whole lot cheaper and the lefts are only $1.99 ea.

https://www.4statetrucks.com/wheels/semi-truck-steel-to-aluminum-long-inner-nut_10114.asp?gclid=CjwKCAjw1cX0BRBmEiwAy9tKHrgslG-awYkaY1ZrlIVh2uXFz_DpYFfEaHCmtGURXp9MEtAUCItDwRoCFj4QAvD_BwE

[ol713]

Hi;
     Also try Napa or carquest auto parts.  Take another one with you for a "show and tell"
                                                         Good luck   

[luvrbus]

You should find one at Dorman Products or the Euclid (Meritor) site to compare   

[sledhead]

I would like to go to a local truck repair shop if they were open

thanks Dave I saved that site

it looks like they are a common part , I hope as my local parts jobber should have it if he is still working

thanks   dave

[richard5933]

Wasn't there a thread recently (past year?) about the quality of some of the lower priced wheel studs?

[luvrbus]

Wasn't there a thread recently (past year?) about the quality of some of the lower priced wheel studs?

I got a notice from Ryder Fleet Parts they ceased operations because of the Chinese made junk they were getting from their suppliers,, cheap is not always good for wheel attaching hardware BTDT and I don't mine spending the 10 to 15 bucks for studs from Meritor

 

[Dave5Cs]

Great Hey Dave send Clifford the bill. He said he doesn't mind pay the higher price. ! Awesome you save too.

[kyle4501]

I noticed several inner nuts were loose when I took my wheels off, so I made sure they were properly torqued when I reinstalled them. Next time I removed them, I found more loose inner nuts.

I looked in the ALCOA manual ( https://www.alcoawheels.com/alcoawheels/catalog/pdf/2017_service_manual_english.pdf ) & found I had just under the minimum stud standout.

My solution was to replace the studs (Euclid # E-8979-R & E-8979-L), inner nuts (Euclid # E-5988-R & E-5988-L), & outer nuts (Euclid # E-5977-R & E-5977-L).

Now, the nuts torque up nicely and the inner nuts are still tight when the outer nuts are removed.

[luvrbus]

Great Hey Dave send Clifford the bill. He said he doesn't mind pay the higher price. ! Awesome you save too.

Bet Dave doesn't mind the higher price either for good studs and nuts,those Chinese studs when you install a nut the things kinda gall and seize when you take the nuts off again

[sledhead]

thanks for trying to save me some money Dave . as much as I would like someone else to pay for them I will pay myself as it is on my coach and I do not believe in all this go fund me stuff . people need to clean up there own problems and learn to live with in there means
but thanks again for trying
I sent a email to my parts guy to see what he has and most times he likes the big guys for parts . as he puts it why not get the right part first .  ( but this is the same guy that got me the new drums that I have been learning with )
the big problem is getting parts NOW ! with all the shut downs that are happening   

dave

[benherman1]

I know from my recent experience the Left hand thread version's part number is wa2001 at Napa. I'd assume if you tell them you want the right hand version of that they'll be able to help you out. They are a non stock part so unless you're lucky they'll have to order them in. They were somewhere around $2.50 each.

[sledhead]

just reinstalled the drive wheels with all new studs and nuts like what is in the link and solved the problem with the new brake drums but they are for aluminum to steel wheels . not sure on the make or brand yet as I have not seen the bill yet but the price was not that bad and my parts guy did say they are a very good supplier . if that means anything ?
I ended up getting 11 right and 11 left so I now have a spare stud and nut for each side


https://www.4statetrucks.com/wheels/semi-truck-inner-nut_48046.asp?utm_source=criteo&utm_medium=cpc&utm_campaign=retargeting


dave

[luvrbus]

just reinstalled the drive wheels with all new studs and nuts like what is in the link and solved the problem with the new brake drums but they are for aluminum to steel wheels . not sure on the make or brand yet as I have not seen the bill yet but the price was not that bad and my parts guy did say they are a very good supplier . if that means anything ?
I ended up getting 11 right and 11 left so I now have a spare stud and nut for each side


https://www.4statetrucks.com/wheels/semi-truck-inner-nut_48046.asp?utm_source=criteo&utm_medium=cpc&utm_campaign=retargeting


dave

Those are for Aluminum to Aluminum wheels but if the stars all line up in the universe I can see where they would work in your case .In Gary Hatts case the drums fit the studs there was no space around the studs and you could not tighten the steel wheel to the drum so we replace both the left and right side inner nuts fwiw he broke a wheel because those nuts were wrong for his application