Window AC unit question.
 

Window AC unit question.

Started by Zephod, August 11, 2017, 01:22:16 PM

Previous topic - Next topic

Zephod

Looking at window AC units, I see a vent at the back and possibly an inlet at the top on the front and an outlet on the front.

How does the rear vent work? Does that simply blow outside air over the coils? Is there a mixing of inside and outside air?


Sent from my iPad using Tapatalk
Carpenter 3800 1994 on a Navistar 1994 chassis with a DT466 and alinson transmission.

j.m.jackson

No mixing of air. The outside coils heat the outside air, inside coils cool the inside air. It's a heat mover, moving heat from the inside coils to the outside coils.
1969 GMC S8M-5303 #131

TomC

There was one guy on the board (can't remember who) that bought two small window A/C's (like 6,000btu) to create one mini split A/C. He cut both in half by the fan motor, using one for the outside condenser and one for the inside evaporator. Then just connected them with additional freon lines and an electrical for the outside fan motor. Was pretty cleaver. Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

Zephod

Quote from: j.m.jackson on August 11, 2017, 01:28:16 PM
No mixing of air. The outside coils heat the outside air, inside coils cool the inside air. It's a heat mover, moving heat from the inside coils to the outside coils.
I saw a 13 inch tall window unit. Arctic King, in Walmart for $97. It struck me that with suitable ducting, it could work for bus ac. Put it under the ribs (I have 14-15 inches from the ribs to the bottom of the skirt). Easy to replace too... just slide out and slide a new one in. Lightweight too.

Just mulling it over.


Sent from my iPad using Tapatalk
Carpenter 3800 1994 on a Navistar 1994 chassis with a DT466 and alinson transmission.

windtrader

I'm still very new here but it seems with some creative engineering one could engineer a central cooling system based on those window AC units. The larger ones are in the 15k btu range, same as the rooftop units. Getting proper air circulation to the external components would be critical but sure does not seem overly complex.
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017

Zephod

Quote from: windtrader on August 11, 2017, 04:30:24 PM
I'm still very new here but it seems with some creative engineering one could engineer a central cooling system based on those window AC units. The larger ones are in the 15k btu range, same as the rooftop units. Getting proper air circulation to the external components would be critical but sure does not seem overly complex.
I'm thinking with careful fitting, a window unit could just slide into a purpose built bay with rubber gaskets connecting to ducting.


Sent from my iPad using Tapatalk
Carpenter 3800 1994 on a Navistar 1994 chassis with a DT466 and alinson transmission.

oldmansax

Remember, window units are not built to stand the shock and vibrations that transport units are. I'm not saying they won't work, just that reliability and longevity may suffer, depending on how well built the particular unit is.

TOM
1995 Wanderlodge WB40 current
1985 Wanderlodge PT36
1990 Holiday Rambler
1982 Wanderlodge PT40
1972 MCI MC7

TomC

I've seen many a trucker using standard window units in their sleepers. You can make them work-open them up and make sure all freon lines are properly supported.
BTU's is very important. I have 3-13,500btu units on my bus and wouldn't do it differently. On my truck I have 2-15,000btu and one 7,000btu unit just for the cab. Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

Zephod

I'm just playing with ideas at the moment. Right now, there is no AC and I'm using solely ventilation and fans.

I haven't yet spent a single night in my bus though I've been in it during the day, sitting at the desk etc.


Sent from my iPad using Tapatalk
Carpenter 3800 1994 on a Navistar 1994 chassis with a DT466 and alinson transmission.

TomC

If you can get away without A/C, all the better. A/C is the single biggest power hog on the bus.
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

Zephod

Quote from: TomC on August 12, 2017, 08:25:25 AM
If you can get away without A/C, all the better. A/C is the single biggest power hog on the bus.
I have painted the roof white. I have not removed the interior steel roof. That's still there. The temp isn't that bad. It's 104 max. I'm about 7 degrees above outside temperatures.

I have no roof hatches and given the lackadaisical attitude of South Carolina toward lopping low hanging branches, won't be installing any. It's only a matter of time before my work bus has to go to the bus doctor with a head injury!

I've got an extraction fan that supposedly expels 130cfm. 9 minutes should see my 28 foot long living space with a total air change. It doesn't seem to help much with heat but it does keep the air fresh.

I have two circulation fans of which one is fully operational and the other has to run off a battery..


Sent from my iPad using Tapatalk
Carpenter 3800 1994 on a Navistar 1994 chassis with a DT466 and alinson transmission.

muldoonman

104 is a nice balmy temperature.  :o