Aluminum center caps
 

Aluminum center caps

Started by Scott & Heather, June 17, 2015, 07:31:27 AM

Previous topic - Next topic

Scott & Heather

Been searching the Internet with various search strings trying to find the name or source of these center caps that hide the lug nuts. Need a name of the style or a source please :)




Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

lostagain

JC
Blackie AB
1977 MC5C, 6V92/HT740 (sold)
2007 Country Coach Magna, Cummins ISX (sold)

eagle19952

chrome rusts/deteriorates...imo go black...

Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.

Scott & Heather

once you go black, you never go back! :)

JC, are you saying those are actually covers? Not rims with center caps?
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

CrabbyMilton

I like that PREVOST that comes with those "hub caps". :)

lostagain

Looks to me like polished aluminum allow wheels such as Alcoas maybe, with nice hub caps that fit over the nuts.

JC
JC
Blackie AB
1977 MC5C, 6V92/HT740 (sold)
2007 Country Coach Magna, Cummins ISX (sold)

skihor

That does look sharp, but, kind of hard to check the lug nuts during a pre-trip. Not for me. When you're driving a 30K to 50K vehicle I pre-trip just like a semi truck.

Don & Sheila

sledhead

I have ones something like this ...but to take them off I have to remove lug 5 nuts to remove and would like to find one you could remove the centre part with out removing the lug nuts ? are they out there ?

http://www.ebay.com/itm/Chrome-Semi-Truck-Rear-Axle-Cover-w-Removable-Hub-Cap-/110683148949 

thanks   dave
dave , karen
1990 mci 102c  6v92 ta ht740  kit,living room slide .... sold
2000 featherlite vogue vantare 550 hp 3406e  cat
1875 lbs torque  home base huntsville ontario canada

Kitt

I have a set of four I would like to part with if you are interested. They're in decent shape and include the brackets for lug-centric wheels. PM me if interested, Scott.
1977 Eagle model 05
8v71, Allison HT740D

Scott & Heather

Kitt, I'm after a specific style that hides the lug nuts like the photos I posted. Are yours this style?


Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

chessie4905

GMC h8h 649#028 (4905)
Pennsylvania-central

Kitt

Scott, yes they are the same. I tried to upload a photo but Tapatalk keeps coming up with an error that I can't upload to the forum. As soon as I figure something out I will get you a photo.


Sent from my iPhone using Tapatalk
1977 Eagle model 05
8v71, Allison HT740D

luvrbus

The hideaways covers like you are looking for Scott only work with hub pilot wheels I am told,the base goes behind the lug nuts and the cover snaps on they don't work with a tapered nut   
Life is short drink the good wine first

Kitt

Cliff, the ones I have use a bracket with a taper to fit the wheel and nuts on a lug centric wheel.


Sent from my iPhone using Tapatalk
1977 Eagle model 05
8v71, Allison HT740D

Prevo

I believe the ones pictured on the Prevost are purchased from T.K.Kane www.tkane.com 800-550-2466.  They are stainless steel very durable but a pain to remove & replace, also very expensive I have them on my coach & lost  one on the rear driver & it was $180.00 for replacement of that one, probably about 6 yrs ago.  I made a special tool to remove them they use a allen wrench for that