Hub cap manufacturer and part number?

Brian Diehl · June 10, 2015, 07:02:16 PM

Anybody have a part number for the MCI hub cap that I could take to NAPA and they look up? I'm hoping someone has a manufacturer and part number that works. The plastic on my hub cap is now leaking. The MCI part # is 15R-2-13 and Mohawk wants $31 plus shipping. Would be nice if I could pick it up at my local NAPA if possible.

Thanks.

luvrbus · June 10, 2015, 07:34:23 PM

I replaced all mine with the SKF-1643 I like those because they have a fill and drain plug you don't need to remove the center plug I paid 26 bucks each through a mom and pop auto parts here in the valley fwiw

Ed Hackenbruch · June 10, 2015, 07:45:17 PM

I think that i got mine from a Roush truck repair shop, for about the same price as Clifford got his.

Brian Diehl · June 11, 2015, 05:38:00 PM

Thank you guys! I'll see what Napa can do for me with that part number. they sure as heck don't know what to do with an MCI part #.

bs4104 · June 11, 2015, 05:54:50 PM

CR 1798 PN: NOS1798 MFR:NAPA Oil Seals has a 6 hole on 6" center

SKF- 1643 has 6 holes on 5.5" center

check out witch fits yours.

wildbob24 · June 11, 2015, 06:33:53 PM

Brian,

All they've got to do at the NAPA store is leave out the hyphens and the MCI number will cross over to the NOS 1798 cap mentioned above.

Bob

Brian Diehl · June 15, 2015, 06:44:10 PM

The front hub on my bus had 6" on center bolt holes. The CR SKF part is 1798. Worked great.

Thanks all for the help!

IMABUSBOY · June 16, 2015, 11:47:53 AM

Quote from: bs4104 on June 11, 2015, 05:54:50 PM
CR 1798 PN: NOS1798 MFR:NAPA Oil Seals has a 6 hole on 6" center

SKF- 1643 has 6 holes on 5.5" center

check out witch fits yours.

IMABUSBOY · June 16, 2015, 11:50:34 AM

Thanks bs4104 Napa had the right hub seal