Interior Design Drafting Software for Coaches
 

Interior Design Drafting Software for Coaches

Started by wayne, November 19, 2006, 10:02:34 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

wayne

November 19, 2006, 10:02:34 AM
A while ago I seen an advertisement for Interior Design Drafting software for Coaches. I am assuming it was in a Bus Conversions Issue so I have been browsing my collection but can't seem to find it. Can anyone tell me where I may have seen this or know who has this software? I am trying to get going on my interior and this would be extremely helpful.
Thanks
Wayne 
email:  wtstanford@aol.com

RJ

#1
November 19, 2006, 12:05:58 PM
Wayne -

Masking tape and cardboard refer/washer/dryer boxes cut to size works even better. . .

;)
1992 Prevost XL Vantaré Conversion M1001907 8V92T/HT-755 (DDEC/ATEC)
2003 VW Jetta TDI Sportwagon "Towed"
Cheney WA (when home)

Slow Rider

#2
November 19, 2006, 12:59:03 PM
Russ,

Only if you already have your bus.........

Frank
The MCI has landed..... We are home.
Dale City Va.  Just a southern suburb of DC
Yes I am a BUSNUT
1976 MCI MC8

wayne

#3
November 19, 2006, 01:02:29 PM
I did the last bus that way.

Dallas

#4
November 19, 2006, 01:55:14 PM
Quote from: Russ on November 19, 2006, 12:05:58 PM
Wayne -

Masking tape and cardboard refer/washer/dryer boxes cut to size works even better. . .

;)

Russ,

I don't mind putting the canned food in the cardboard fridge, but everytime I light the paper stove the darn smoke detector starts hollering!
And to make it worse, everytime I use the washer, it just collapses and I have to keep replacing all these major appliances! ;) ;) ;)

bobofthenorth

#5
November 19, 2006, 02:28:17 PM
I don't know what software you saw recommended but any cheapo home architect software will let you play with dimensions and see how things fit.  I have something called 3D Home Architect Deluxe by Broderbund.  I think it was $10 in the bargain bin at Wallymart.  Look for something that lets you do a 3D walk through and something with built in standard fixtures and cabinets.  I've also got DesignCAD 3D which is very powerful, very complicated and a major PITA.  But if I need a really good drawing then I bring it out and fight with it.  If I just need to play then Broderbund is the way to go.

R.J.(Bob) Evans
Used to be 1981 Prevost 8-92, 10 spd
Currently busless (and not looking)

The last thing I would ever want to do is hurt you.
Its the last thing but its still on the list.

RJ

#6
November 19, 2006, 04:55:27 PM
Quote from: Dallas on November 19, 2006, 01:55:14 PM

I don't mind putting the canned food in the cardboard fridge, but everytime I light the paper stove the darn smoke detector starts hollering!

And to make it worse, everytime I use the washer, it just collapses and I have to keep replacing all these major appliances! ;) ;) ;)



So Dallas -

You're telling me you never got out of the design stage, eh?

Or is it that Cat won't let you near nails, teflon tape and Gorilla Glue?

:D ;D :D ;D :D ;D
1992 Prevost XL Vantaré Conversion M1001907 8V92T/HT-755 (DDEC/ATEC)
2003 VW Jetta TDI Sportwagon "Towed"
Cheney WA (when home)
Print
Go Up Pages1
User actions