45 XLE Prevost project

[robertglines1]

For those patiently following: And donating your knowledge: interior 80% rough in and final finish applied to 50% of ceiling. 90% electrical. same with plumbing. Hvac in and working. Fire damaged suspension in rear finished by next week. Then will slide engine trans in.Simple sounding;this part scary to me because wireing harness is cut just above rear differential/wires are marked with # on them.  Florida in Jan?? I don't Know!    Judy and I  Yes.      Bob       Maybe

[Ericbsc]

YOU CAN DOOO ITTTT!!!!! Sleep 2-3 hours a day!!! 

[Scott & Heather]

We're rooting for you! Seriously...nice to get an update...a teaser photo would be kinda neat...

[stevet903]

Bob - do you have a wire stripper like this one?

http://www.farmandfleet.com/products/314558-ezstripper_automatic_stripper_and_crimper.html

It is worth it's weight in gold when you have to strip wires in cramped quarters like under dashboards or above differentials.
One handed operation - all you need to do is get the wire between the jaws and squeeze. 

How are you planning to connect the wires together - crimp or solder? 

Here's a link to some adhesive heat shrink that would be water tight if you solder - http://www.buyheatshrink.com/heatshrinktubing/3to1adhesive.htm

Here's a link to some crimp terminals that would work too - http://www.ryderfleetproducts.com/ryder/af/ryder/core/content/product/srm/key/V84%2011961/pn/Butt-Connector-Shrink-22-18ga/erm/productDetail.do

Steve

[robertglines1]

Thank's for lead Steve.   got them.  also planning on splice box just for extra insurance.    Bob