The Money is here..
 

The Money is here..

Started by Greg Paciga (S.Ga), June 20, 2011, 01:09:19 PM

Previous topic - Next topic

Greg Paciga (S.Ga)

Got the insurance check for the damage from the blow out. Now it's time to start shopping I need the drivers side / rear rubber fenders. The one over the dual and the middle pc. Any one know here I can get some good used parts?

I could also use one Tag wheel / 5 hand hole stainless wheel cover. I'm trying not to buy a whole set. The more I can save the more I get to keep. LOL

Thanks
Greg
S. Georgia
Don't think your going to do a conversion overnight. I did and 4 years later I'm still only 85% done. LOL  :)  :)

Why??  Because I did it right. Check out my any of my 900+
pics posted on Community webshots.com

mugsytrpt

Hey Greg,

If you find out about a price on the rubber guards let me know.  I need both sides for my bus.  Have you called MCI?  I have been very pleased with most prices buying from Jackie in Orlando.  Sometimes I have found his prices to be cheaper than what I can find on the internet.  Just for an example....A fuel sending unit I can buy from MCI for about $40.00 cheaper than anywhere else.  Good luck with your search.

BTW ... we are only about 40 miles apart.  I live in Moultrie.

Take care,
James
1981 TMC MCI9 Converted
Purchased April 2010
Located in South Georgia
New genset April 2013

Greg Paciga (S.Ga)

Pr ogressive checked MCI and paid me for new ones AT $148 EACH FENDER..OUCH and $46 for the small center pc. Thats $342 for ones side over the duals and Tag.
Surely someone has some good used ones. Or maybe a bus salvage yard.
Don't think your going to do a conversion overnight. I did and 4 years later I'm still only 85% done. LOL  :)  :)

Why??  Because I did it right. Check out my any of my 900+
pics posted on Community webshots.com

luvrbus

FWIW  you can buy the fiberglass fender from Richard at R&M Fiberglass for the duals and tag for 95 bucks for each side ,190 dollars
for both sides
good luck
Life is short drink the good wine first