Speaking of Ramco mirrors...
 

Speaking of Ramco mirrors...

Started by bevans6, December 02, 2010, 12:13:24 PM

Previous topic - Next topic

bevans6

Does anyone have a wiring diagram for the Ramco remote control switch?  I have a switch, about 1" square, that has a joystick know that switches to two positions.  I didn't know if it was to control two mirrors (left and right) or to control both flat and convex glass on one mirror.

Thanks, Brian
1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Allison MT-647
Tatamagouche, Nova Scotia

Nick Badame Refrig/ACC

Hi Brian,

I guess the easiest way to figure it out is to call Matt at Ramco.

Ramco Technical Support:
Matt Reverman
574-266-1455 ext. 109
mreverman@ramco-eng.com

Good Luck
Nick-
Whatever it takes!-GITIT DONE! 
Commercial Refrigeration- Ice machines- Heating & Air/ Atlantic Custom Coach Inc.
Master Mason- Cannon Lodge #104
https://www.facebook.com/atlanticcustomcoach
www.atlanticcustomcoach.com

JackConrad

Lets see if this works.  Here is the schematic. If you cannot see it good enough, email me and I will send it to you.  Each switch controls 1 mirrir. The center switch it to select flat or convex mirror.  I installed a separate SPST switch for the heated mirror option.  Jack
Growing Older Is Mandatory, Growing Up Is Optional
Arcadia, Florida, When we are home
http://s682.photobucket.com/albums/vv186/OBS-JC/

bevans6

jack, that is exactly what I needed .  And I would never have figured it out by trial and error.

Brian
1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Allison MT-647
Tatamagouche, Nova Scotia