Detroit 6v92T set up
 

Detroit 6v92T set up

Started by eagle10, August 27, 2006, 05:46:11 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

eagle10

August 27, 2006, 05:46:11 AM

Would I run into any issues if my 6v92T were set up from 2150 to 2300? Ideas?

DrivingMissLazy

#1
August 27, 2006, 05:52:37 AM
I run the 8V92 in my Eagle 10 at 2300 rpm for at least 100,000 miles with no problem. This was full load governed rpm. I seldom run it that fast, but did run in the 2200 rpm up a lot of grades. I do not know what the top speed was but I could bury the speedometer at 80 and still had more left.
Richard

Quote from: eagle10 on August 27, 2006, 05:46:11 AM

Would I run into any issues if my 6v92T were set up from 2150 to 2300? Ideas?
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride

Happycampersrus

#2
August 27, 2006, 06:38:03 AM
It won't cause any problems. The only time you would have to worry is if you were to go much above 2500.

Dale
Print
Go Up Pages1
User actions