Buffalo electrical stuff in AC bay

[Chaz]

OK guys,
  I have another thread going on the structural aspects of the inside of AC bay on my 4108. Now that I "think" I have a plan for that, (It's called "seat of the pants overkill.  ),  I'd like to do a little spring cleaning of the electrical "stuff" hanging on the back wall of that bay.
My guess is that most of it is useless since the AC is gone. There is a "Panel", I'll call it, with several different kinds of relays and/or breakers on it. It's exposed and a couple look as tho they should have had covers on them. If I can cut all that out I can move my Vanner 12v inverter to that spot and get it a little further away from my generator.
Sorry my camera is "under the weather", as it were, so I can't post a pic. But if you are familiar with a Buffalo or better yet a, 24v. 4108, I'd be interested in knowing what I can cut out. There are some pretty good size wires, possibly #6, that run to what appear to be large round breakers. There are also quite a few smaller wires running to what I think is a plug-in junction panel. I will check for voltage on any wires that I cut and tape them off, but I don't want to get rid of something I need. All the "spaghetti" in these big boys worries me a bit. I think if I stripped it all out, I could retire! 

  Thanx again!
    Chaz