I'd like to add a tach and a transmission temp gauge need input

[RickB]

Gumpy,

Now there's the Craig I know so well. Mr electronics at your service.

Did you ever hear back from the battery guy?


Let me know and thanks for the heads up

Rick

[gumpy]

Gumpy,

Now there's the Craig I know so well. Mr electronics at your service.

Did you ever hear back from the battery guy?


Let me know and thanks for the heads up

Rick

No, I didn't. I'll have to give him a call... He may not have had time to test them yet, or just forgot.

[dbenck]

Hi Rick...I have not had any problems with the vinyl I used, but for that one spot. Had oil
or something in the wood. I have been told if you prime paint the plywood first the pre-glued
will stick better than the plain plywood. It worked for us.

David Benck

[jmblake]

Hi Rick,
My 9 didn't come with a tach but the wire's were there, I don't remember the # but there was several empty studs on the panel that had wire's connecting the front and back and didn't go any where else. I just matched up the stud # on each panel and every thing worked out OK. Jason