Electric Windshield Wiper Motor Conversion

[alltech]

I am coverting my phneumatic windshield wiper motors to electric motors. I have looked at a couple of conversion kits, but they all involve a certain amount of fabrication. Quotes for the kits range from $500 to $1300. From my point of view if I have to do any fabrication to make these kits fit, I might as well do it all. I am looking for a source to procure a couple of 12 volt dynamic park drive motors. Does anyone have any suggestion on what motors to use and a supplier?

Regards,

Ross

[Bob Belter]

Ahoy, Ross,

Freightliner --  maybe 'millenium  ' stuff is the windshield wiper system that I  used
for the conversion on my Eagle -01.
Reasonable price from Valley Truck Parts 800 598 5715 Fresno CA.  Serouus comercial
truck components, and you will be able to get parts for a long time. 
You must fabricate the mountings, but they work great, and have nice controls.

I now -- no longer -- wish to take a hammer and smash through the windshield
to slay those frantic air wipers!!!!!

Enjoy   /s/   Bob

[bobofthenorth]

I bought an electric wiper conversion from IBP the first year we were at Rickreall.  The system came from Autex in New York.  I know this because I ended up dealing directly with Miguel at Autex in order to get it working.  Mine came with some switches that had been on the shelf for a very long time in a very damp location.  Ultimately I was able to buy the switches locally at NAPA but it took a while to determine what the problem actually was.  I was well pleased with Miguel's support and assistance and once working the wipers have worked flawlessly.  PM me if you want more details but I'd call Miguel if I were you.

[alltech]

Thanks for the information

I will check both these options

Regards,

Ross

[gumpy]

I just bought an IBP kit from a guy who had Newell. He was trying to install these but they wouldn't fit. He had started to modify the mounts before he figured out they wouldn't fit, so IBP wouldn't take them bak. I'll probably have to modify them to fit my MC9. The invoice was over $1400!!! I got them for substantially less than that 

[JackConrad]

You might want to check with Fred Hobe in Madison, FL.  He has a kit that is great and much lower priced than IBP.  He will also install them if you take your coach to his place.  Jack

[Melbo]

I got mine out of a wrecked semi truck for 100 dollars but as noted took some fabrication and engineering to get it to work as desired.

Melbo

[muddog16]

I agree with Bob, Miquel at Autex is the man when it comes to electric windshield wiper systems!

[luvrbus]

There is a outfit in Oregon called AIM that will build the system for you for less than 1/2 of what IBP charges with wet arms , no plastic on the arms and better motors.   


good luck

[Len Silva]

You might want to look at marine supplies.  Here is just one example:
http://www.westmarine.com/webapp/wcs/stores/servlet/SiteSearchView?catalogId=10001&Ntx=mode+matchallpartial&keyword=wiper+motor&Ntt=wiper+motor&N=377+710&y=0&x=0&storeId=10001&Ntk=Primary+Search&ddkey=SiteSearch

Using two motors would be much easier though more expensive and less cool.

[mccarlk]

what about about wiper motors and arms from a international school bus?

[mccarlk]

any thoughts on the international bus wiper motors, theres a yard with a few retired busses they are parting out , will these be stong enough?

[gumpy]

any thoughts on the international bus wiper motors, theres a yard with a few retired busses they are parting out , will these be stong enough?

I think they would work ok if they are pantograph setup for the double arms. You'll have to fab brackets to fit your own install.

Actually, I thought Jack Conrad used wipers from an old schoolie, but maybe I'm mistaken.

[luvrbus]

Guys the air wipers can work as good as electric they have been on these buses for 20 to 50 years without any maintenance done what so ever except changing the wiper blades.
Service the motors,arms. replace the control valves and install a regulator before the air supply to keep the supply at the same pressure 90 lbs or lower depending on the speed you like and you will be amazed how good they work.  
There is a delay action available for air also for those who would like it



good luck

[Eagle Andy]

Hey Clifford , I was inpressed with mine after I reworked mine (one down one to go) It was rather easy . Anyway were can I get a delay ? Thanks Andy