1997 Dina Viaggio Bus Entry Door Glass
 

1997 Dina Viaggio Bus Entry Door Glass

Started by lalimo, May 17, 2009, 01:26:36 PM

Previous topic - Next topic

lalimo

Hello guys.  Anybody Can help me to find out where can I get entry door Glass for 1997 Dina Viaggio Marcopolo bus.  All MCI dealers are out of stock.  Any parts out Dinas?  Please need a help.

belfert

Too bad I just threw out my old Dina entrance door last fall.  The glass was safety glass, but I don't know why a door would require anything more than tempered.

Can't a glass shop just cut out a flat piece of glass to replace it, or is the glass curved?  I don't remember.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

ruthi

Lalimo, if you find where you can get it, please let me know. We need the same glass for our door. Ours is a 1998. The outer glass part is broken out. It is curved, so, dont have a clue where it can be found.
Mixed up Dina, ready for the road as of 12/25/2010
Home in middle Georgia, located somewhere in the
southeast most of the time.
FIRST RALLY ATTENDED: BUSSIN 2011!

niles500

If nothing else - there are many composites out there that can be ordered in varied thicknesses, tints and applications that will flex enough to follow complex curved contours - I know it's not OEM, but then it appears that you may not have an option - HTH
(\__/)
(='.'=)
(")_(")  

- Niles