Onan Parts
 

Onan Parts

Started by Stan, April 22, 2008, 09:12:24 AM

Previous topic - Next topic

Stan

Here is a link to an Onan dealer that was highly recommended on another board that frequent. I know nothing about them but you can compare prices.
http://www.perr.com/onan.html

DrivingMissLazy

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride

coachconverter

Dont know if this will apply, but I have a crapload of new in the box parts for an Onan MDJF series Genset, mostly reuild items and a rebuilt fuel pump.  I think the MDJF is a marine application though.  Thought I'd throw it out there.

Todd

Ncbob

Todd, you're absolutely correct. The Onan Model number breaks down as follows:
M = Marine converted
D = Diesel
J = Engine family
F = Indicates 4 cylinder of larger bore than the C Model

Most of the parts interchange between the C and the F models. Really all I can think of is the difference in the size of the pistons and perhaps a small internal change in the injection pump.

So the parts you have will allso fit the DJC and RDJC Models. (R) for Radiator cooled...no prefix for air cooled.

Hope this helps.

NCbob