Needed... Parts to connect 7.3 diesel to Allison

[frank-id]

Changing from manual trans to Allison.  Need flexplate, bellhousing, flywheel, support ring and fasteners.
Any help appreciated.   Frank in Idaho
frank-idatCrown.myfr.net

[revbusnut]

Dont know but I would check with NIMCO

[TomC]

The big thing here is does it have a Ford bellhousing or a standard SAE housing?  Usually, if it has a SAE housing, the parts are fairly universal to switch.  If the bellhousing is from a Ford, you'll have to change it to a SAE bellhousing.  What model of Allison are you switching it too.  As long as it isn't the AT545 4 spd that doesn't have a torque converter lockup, most all other Allisons are good.  Good Luck, TomC

[wrench]

Changing from manual trans to Allison.  Need flexplate, bellhousing, flywheel, support ring and fasteners.
Any help appreciated.   Frank in Idaho
frank-idatCrown.myfr.net

    Well I may be able to help because I 've been there a while back(want to replace the E4OD in a  F350 with an allison) & gatter the parts & kind of loose the heat.
Now if that interest you, I will be driving north to N.H. from FL, start at 4:00AM 07/26 trough I-75,301,I-95,I-81.
       Let me know I got more pict with casting# . if you want my phone, send email, I am on till 10:30-11:00.
        wrench