finally got my dinette and microwave project completed
 

finally got my dinette and microwave project completed

Started by cody, June 25, 2007, 03:30:48 PM

Previous topic - Next topic

cody

Just completed 2 projects on my bus, the dinette and the microwave enclosure, the dinette bases are wired for internet and have electrical outlets built in with the central vacuuming outlet hidden out of site connecting to the canister in the bay, I also wired in nightlights that shine down and across the floor with a dimmer switch under the cushion overhang and the table drops down for sleeping. The bases have storage under them. The refrigerator is now built in with a vented cabinet over it holding the microwave, the cabinet has a power vent thats thermostatically controled so if it gets warm it power vents the heat outside. 

Dreamscape

Nice job Cody!!!! Bet you feel good about that!!!

What's next?

Happy Trails,

Paul

Dreamscape

cody

Thanks, I'm kind of proud of how it turned out, the next project will be the bathroom.

BusCrazyTom

Great looking work, man! I'm sure I'll be talking to you when I'm ready for my bus..when I get it, that is. :)

BusCrazyTom the Analog Dinosaur

H3Jim

Jim Stewart
El Cajon, Ca.  (San Diego area)

Travel is more than the seeing of sights, it is a change that goes on, deep  and permanent, in the ideas of living.

Slow Rider

Great job Cody, from what I can see in the pics, you have a very nice bus.

Frank
The MCI has landed..... We are home.
Dale City Va.  Just a southern suburb of DC
Yes I am a BUSNUT
1976 MCI MC8

dwbruner

Great work!  Looks like you're getting closer.

Darrin
Darrin Bruner
1985 Eagle Model 10

Gary '79 5C

Cody,
Great Job, your dinette looks straight out of a high end home furnishings magazine. Very stylish with the accent lighting.

Gary
Experience is something you get Just after you needed it....
Ocean City, NJ

cody

Thanks guys, here is a pic of one of the bases, I used a formica laminate so it would be easy to clean and the pic shows the oak accents and the rounded front.

buddydawg

Nice job.  I really like the floor in the dinette area.
1972 GMC T6H-5308A #024
1984 Eagle Model 10

Brandon Stewart - Martinez, GA


FloridaCliff

Cody,

Nice work!

Its a pleasure to look at your project.

Cliff

1975 GMC  P8M4905A-1160    North Central Florida

"There are basically two types of people. People who accomplish things, and people who claim to have accomplished things. The first group is less crowded."
Mark Twain

Sojourner

Very good arrangement & nice work.

I know you are happy that is done to move on to next project.

Thanks for sharing and good idea of venting unwanted refrigerator's heat.

If not already installed or in future plan, you may want to add a outside inlet thorough floor under refrigerator condenser to make up for low pressure while exhaust fan running.

Keep up the good work!

Sojourn for Christ, Jerry

cody

Jerry, the refigerator has got a large vent at the bottom in the front for an air pickup at floor level, hopefully that will be enough, I tryed to cover any issues that might come up as far as the engineering goes, my wife says I specialize in over kill lol.

superpickle

 :o

Oh Lord of the Wood.
Wouldest thou commuth to New Mexicouth. and maketh Noise withth mine Saw ?
Thou art blesseduth with the Wood art mastery..  ;D




;)


Beautiful.. stuff !!!!
Support Global Warming:
Drive an SUV.