Looking for a Multiplex for a MCI
 

Looking for a Multiplex for a MCI

Started by ktmossman, June 19, 2021, 02:32:59 PM

Previous topic - Next topic

ktmossman

Looking for a Multiplex Module for a MCI. Mine is a J, but I know they used the same Multiplex Modules in Ds, Es, and Js.  I can get it from MCI, but I'd much prefer to find a used one.  Any suggestions are welcome...
Kevin Mossman
2006 MCI J4500
Dallas, TX

Busted Knuckle

Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

luvrbus

Quote from: Busted Knuckle on June 19, 2021, 07:32:35 PM
Sam Caylor at Caylor Supply in Rantoul, KS (Kansas City area)https://wholesalewarranties.com/directory/caylor-supply-used-mci-bus-parts-rantoul-ks/
;D BK  ;D

I heard a few years back BK that Sam wouldn't sell the modules because he no way of testing one ,that may of changed though Sam does change
Life is short drink the good wine first

thomasinnv

Some are called, some are sent, some just got up and went.

1998 MCI 102-DL3
Series 60 12.7/Alison B500
95% converted (they're never really done, are they?)

Glennman

I bought one from Sam at Caylor's recently. I don't know if it works yet though, as I haven't installed it yet. I paid $300.

ktmossman

Just for future reference, I ended up finding them at Cardinal Coach.  I bought a pair of them (tested).  I will also be sending my existing one in to be looked at for a repair (to Janek).  They don't charge just to look at it and decide if it can be repaired.  If they can repair it, I will have them do that and then keep it and sell one of the others.   Either way, I end up with a spare to hang on to.
Kevin Mossman
2006 MCI J4500
Dallas, TX

someguy

What went wrong with your unit ?   Which one ?

ktmossman

The #11 circuit (the passenger tail light flasher when the bus is idling) for one side went out.  Brake, turn signal, and everything else was fine...just that one circuit.  Some of the wiring in the light was crispy, so I'm assuming it shorted at some point and fried the circuit.  In theory, I could have just left it alone, but my mild OCD wouldn't allow that.
Kevin Mossman
2006 MCI J4500
Dallas, TX