6V92 Remote Oil Filter Re-Location
 

6V92 Remote Oil Filter Re-Location

Started by brettpearson67, April 24, 2020, 04:14:01 AM

Previous topic - Next topic

brettpearson67

Was wanting to relocate oil filter to more convenient spot. Does the filter have to be mounted at a certain elevation relative to the pan oil level? I guess in other words, can it be mounted up high, above pan?
"I Wanna Rock!"

1985 MCI 96A3 "Making Memories"

Making Memories/My Bus Converson Blog
https://brettpearson67.wixsite.com/website

luvrbus

Mount it anyplace you want makes no difference 
Life is short drink the good wine first

TomC

My transit bus (8V-71) originally had a remote oil filter that was mounted in the middle behind the engine. Great if you are doing the maintenance from a pit, but even with the bus up on blocks, not a good location. So after the oil filter broke off (whole another story) and I had a spin on put on, I changed the location of the oil filter. To get to the original, I had to remove the radiator (V-drive). I then had two oil lines made up (Hose Man) so now the spin on filter is right inside of the right side access door. Very convenient and easy to service. In the 17 years it has been on, no leaks, no issues. Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

luvrbus

On Jims Eagle we remote mounted the fuel,oil and transmission filters all in 1 location on the drivers side open the side rear door and bingo there they are
Life is short drink the good wine first