Power Steering Fluid?
 

Power Steering Fluid?

Started by tyreman, June 17, 2019, 08:39:32 AM

Previous topic - Next topic

tyreman

I have a MC9 8V71 with what looks like a leak on the power steering reservoir, it currently has ATF in it. What is the proper replacement fluid?  ATF, 10w oil, something else? Can you mix ATF and oil or does it need to be completely flushed of old fluid before adding a different type?

Utahclaimjumper

Utclmjmpr  (rufcmpn)
EX 4106 (presently SOB)
Cedar City, Ut.
72 VW Baja towed

Bill Gerrie

Don't mix them. Some guys don't use Dexron because they are afraid it might get into the oil if then pump seals fail.

GnarlyBus

Does having or not having the integral steering box matter for what fluid you use?
1984 MC-9 w/ 6v92TA & Allison 740
Oregon Summers & Arizona Winters
Full-Time since 2015

Bill Gerrie

No. I use 10W oil as it flows easily in cold weather. I wouldn't use thicker then 10W or the pump will squeal.

tyreman

Thanks everyone for your info!

TomC

When I changed my air over steering to Sheppard integral, the rebuilder of the Vickers pump told me to run 15W-40 engine oil in it. Granted it makes some noise when cold, but other than that, all OK. Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.