MC8 Lavatory Removal
 

MC8 Lavatory Removal

Started by PNWorBUST72, March 10, 2018, 05:07:53 PM

Previous topic - Next topic

PNWorBUST72

So I have the entire lav out and i'm left with this...

I did a search but found nothing about the air hoses/valves that are left.  Can I just cut them off smooth or I thought I remember something about an alarm maybe?  Wife wants me to build a couch for the kids on that ledge...



1978 MCI-8 Crusader - First Conversion!
Jacksonville Florida

buswarrior

Trace back and terminate properly.

You don't want a S**TT* air disablement...

Happy coaching!
Buswarrior
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift

eagle19952

looks like a bit of it is still there..a big bit.
:)
Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.

PNWorBUST72

Any hints on pulling the tank?

I am told there is a strap with bolts deep in the back but havent found em yet and there is nothing in the parts book.
1978 MCI-8 Crusader - First Conversion!
Jacksonville Florida

Boomer

Looks like the water circulation line.  "Water" is not the correct term.  Filthy holding tank contents is more like it.  The blue water circulated around the hole in a circular fashion to "rinse" the sides of the can.  There was also an air circulation fan motor accessed from the engine compartment that pulled fumes out.  8's and 9's did not have a flushing lav, they were just an outhouse on wheels so no air lines in the lav just the exhaust fan and water circulator.  Did you wear your haz mat suit?
'81 Eagle 15/45, NO MORE
'47 GM PD3751-438, NO MORE
'65 Crown Atomic, NO MORE
'48 Kenworth W-1 highway coach, NO MORE
'93 Vogue IV, NO MORE
1964 PD4106-2846
North Idaho USA

eagle19952

Quote from: Boomer on March 11, 2018, 12:12:19 PM
  Did you wear your haz mat suit?

or get a Hepatitis A and B vaccine ?
Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.

Mak209

Just took the tank out of mine last weekend. You will have two straps that hold the tank up.the best way I found was to remove as much of the fiberglass shield around the tank and expose the straps a claw hammer worked great. The strap bolts are 9/16 and are tucked in real close to both left and right sides if standing behind the bus. I removed that hose with no problem so far.hope this helps.
1984 mc9 6v92 ht740 valley springs ca.

Scott & Heather

Angle grinder is your friend. Cut it all out. Cut the straps. ScRap or throw away everything and be done with it. This is like a 5 year old unwrapping a Christmas present...


Sent from my iPhone using Tapatalk Pro
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

pabusnut

Scott,

Christmas Present???
I'd be curious to see what's under your tree! ;D ;D

Steve
Steve Toomey
PAbusnut

Jim Eh.

"Some days it's just not worth chewing through the restraints"
Jim Eh.
1996 MC12
6V92TA / HT741D
Winnipeg, MB.

PNWorBUST72

Thanks, I will try and get back there tomorrow and see what I can find.

I WILL say that I found a label less beer bottle underneath the insert, underneath the toilet seat.  Just weird...
1978 MCI-8 Crusader - First Conversion!
Jacksonville Florida