Replacing driver's side window
 

Replacing driver's side window

Started by chessie4905, February 13, 2018, 08:26:19 AM

Previous topic - Next topic

chessie4905

Replacing drivers side window yesterday. Bought a Motion window with slider a couple years ago. Finally got around to it. Glass came out without breaking due to almost new rubber seal assy. The little slider window assy....what a bitch...all but two screws wouldn't come loose.... little screws on inside needed ground away with a Dremel, and after a lot of careful prying, got it out in pieces. Now to prep opening to install new assy. Little bit of rust to treat on bottom sill.  I wish the coach was all aluminum like the 4104.
BTW, if anyone needs almost new, no cracks window seal, and/or glass assy., can contact me.
GMC h8h 649#028 (4905)
Pennsylvania-central

pabusnut

John,

Of course we need pictures, at least us 4905 guys!

We should get the PA guys together for a non-rally this summer.  I know there are at least 3-4 of us in Central PA.

Steve
Steve Toomey
PAbusnut

Gary Hatt - Publisher BCM

If you are having a Bus Rally, Event, or NRG (Non-Rally Gathering) please let us know and we will publish it in our magazine.  We list all  of the bus rallies that we know about and we do it for free.  We will also list it on our rally page at http://busconversionsstore.com/rally-news/.  If you do, can you hold 100 buses if that many show up?  :D

Send me an email at Gary@BusConversions.com with your information in it.
1999 Prevost H3-45
Gary@BusConversionMagazine.com