Fridge died
 

Fridge died

Started by Branderson, October 04, 2017, 09:07:37 AM

Previous topic - Next topic

Branderson

We went away last weekend for a 3 day get away and sure enough as i'm driving, the wife opens the fridge and it clicks and dies.  It's a regular house fridge and I'm still waiting to find out if it's for sure dead.  I called the local A/C Fridge repairman that the camp ground knew and he came out tested it and he said it was done.  I ended up, once the trip was done, taking the bus to his shop.  He scared me at first b/c he was talking about taking the fridge thru the window.  I called my uncle later on and he said do NOT let him do that b/c for one the replacement seals are super expensive.

I feel pretty stupid now b/c I may have wasted money.  After talking to my uncle, he bought the fridge from sears and just tipped the delivery guys extra for them to get it in the bus.  He also told me he took the hand bar off and the board that goes over the steps when driving in order to maximize the room to get the fridge in. 

Plus, I need to go back there this weekend to find out the dimensions to the fridge from the manual.  I'm just kind of venting about feeling stupid.  I have to constantly remind myself that normal RV repairmen will most likely not know much about the converted bus. 
- Brad

brmax

I think many of the windsheild rubber seals are meant to come apart easily. Although im sure they are not cheap if replacement is required, as all windsheild seals. Good topic to discuss here and one i recall several mentioned, using the windshield route. So nothing wrong with checkin with the local glass pro. Their experience in this area is, well, just say watching them makes it look real easy. They would likely save the seal easily if its not all cracked up now.

Interesting post
Floyd
1992 MC9
6V92
Allison

Branderson

Quote from: brmax on October 04, 2017, 09:25:41 AM
I think many of the windsheild rubber seals are meant to come apart easily. Although im sure they are not cheap if replacement is required, as all windsheild seals. Good topic to discuss here and one i recall several mentioned, using the windshield route. So nothing wrong with checkin with the local glass pro. Their experience in this area is, well, just say watching them makes it look real easy. They would likely save the seal easily if its not all cracked up now.

Interesting post
Floyd

Wow i'm an idiot!  I didn't even think about the front windshield.  I was looking at the side windows.  Ugh man I'm batting a 1000 here
- Brad

edvanland

Ed Van
MCI 7
Cornville, AZ

Branderson

- Brad

bevans6

If you have any stock windows, can't you just pop the emergency latch and lift the window out of the way?

Brian
1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Allison MT-647
Tatamagouche, Nova Scotia

kyle4501

The fridge quitting was unexpected & caught you off guard. Happens to me all the time. thank goodness for patient friends that encourage me to take the time to think it thru instead of trying to throw money at it.

If it doesn't kill you, it will make you stronger -- You will gain more confidence with your coach & your abilities with each opportunity.  ;D

If it will go in thru the front door, there is no reason to mess with the window seals - if the windows aren't leaking - LEAVE that potential problem alone! The glass is less likely to get broken if left alone also.

I'd remove the fridge door, the entry hand bar & step cover & much more before I put the glass at risk. . . . . But, that is just my opinion.  ;)
Life is all about finding people who are your kind of crazy

Get your facts first, then you can distort them as you please (Mark Twain)

Education costs money.  But then so does ignorance. (Sir Claus Moser)

luvrbus

With fridges one never knows how the PO got it in,Sonnie RIP installed his from the bottom of the floor when he had his Eagle engine out installing the Cat,Pam and Tony had hell getting it out when it died
Life is short drink the good wine first

PP

I'm with Kyle on this one. Home-style refrigerator doors are made to be removed and they make the fridge a lot narrower without them. Windows and old window seals can trigger another nightmare you don't want to deal with if you don't have to. We had a leaky seal in a newer Ford truck that I took into a glass shop for a new seal and the window had been secretly delaminating. It crystallized right in front of my eyes. Never seen anything like that happen before. Even the tech working on it, and he didn't do anything wrong, stood back in awe. You just never know. Good luck.
Will

luvrbus

I have seen the RV manufactures install all the appliances and furniture then stand the walls up and never even thing about removing anything 
Life is short drink the good wine first

Astro

The fridge is dead. Use a Sawsall. I guarantee it will then fit through the door.
Ken
Arlington, WA
1971 MC-5B, U7017, S9226 (On the road)
1945 Flxible Clipper (In conversion)
1945 Flxible Clipper town buggy

j.m.jackson

I second the use of a sawzall. I used one earlier this week to take out some metal wall framing that had been welded together inside the bus and wouldn't go through the door. I did measure, tho, and my fridge was 23" in it's smallest dimension, and my door opening was 28". It didn't look that way, but it was. About to put in new flooring and paint the walls/ceiling.
1969 GMC S8M-5303 #131

chessie4905

Ahhhhh...just take a damn torch to it. You cut a freon line in the wrong place and expect to have refrigerant and or oil leaking or spraying everywhere.
GMC h8h 649#028 (4905)
Pennsylvania-central

luvrbus

You want get much Freon from a fridge most hold less than 1 lb of R134
Life is short drink the good wine first

Zephod

Caution... if the fridge has cfc refrigerant, the hydrocarbons from a blow torch could combine to produce phosgene. Trust me, you don't want to breathe phosgene.

I'd use an angle grinder... its quick and easy though you'll probably use several disks.


Sent from my iPad using Tapatalk
Carpenter 3800 1994 on a Navistar 1994 chassis with a DT466 and alinson transmission.