Build generator with Yanmar engine - Page 6
 

Build generator with Yanmar engine

Started by Scott & Heather, September 04, 2017, 07:54:17 PM

Previous topic - Next topic

thomasinnv

My little kubota has 24:1 compression ratio, i wonder about the results of turboing something like that. Maybe a waste gated turbo with around 7-8 psi?

Sent from my SM-G920T using Tapatalk
Some are called, some are sent, some just got up and went.

1998 MCI 102-DL3
Series 60 12.7/Alison B500
95% converted (they're never really done, are they?)

Scott & Heather

Ok so BK, yes maybe but I'm involved in this more than I wanted to be at this point so I'm bailing out. I just spoke with Martin diesel and they confirmed that at 1800 rpm we can only run a 4500 watt head. Just not enough juice for me right now :( so that's that.


Sent from my iPhone using Tapatalk Pro
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

luvrbus

Yep 4500 watts you take the heat and altitude into consideration some places you are down to 3800 to 3500 watts not enough ponies there big guy   
Life is short drink the good wine first

eagle19952

Quote from: Scott & Heather on September 19, 2017, 08:33:03 AM
Ok so BK, yes maybe but I'm involved in this more than I wanted to be at this point so I'm bailing out. I just spoke with Martin diesel and they confirmed that at 1800 rpm we can only run a 4500 watt head. Just not enough juice for me right now :( so that's that.


Sent from my iPhone using Tapatalk Pro

but look at what you learned :)
Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.