New Radiator Leaking - Page 2
 

New Radiator Leaking

Started by brianzero, June 04, 2017, 06:44:40 AM

Previous topic - Next topic

Iceni John

I used the Johnson 235-24 cork gasket tape  -  it's green and 1/8" thick, so maybe that's the one available from NAPA?   One more thing that I was told to do:  do not make the bolts' holes by just shoving the bolts through it, but instead use a proper punch or drill them out.   This prevents tearing the gasket.

John
1990 Crown 2R-40N-552 (the Super II):  6V92TAC / DDEC II / Jake,  HT740.     Hecho en Chino.
2kW of tiltable solar.
Behind the Orange Curtain, SoCal.

luvrbus

There are gaskets available for all radiators people use tape because you can use it on any radiator tank,the 1 pc gaskets are so much easier though 
Life is short drink the good wine first

Geoff

I looked eBay and found two 100' rolls for $70-72

--Geoff
Geoff
'82 RTS AZ

luvrbus

Yep I can buy the 100ft rolls from Napa for around 85 bucks,but the 50ft rolls will do me 2 Eagle radiators and the 100 ft rolls get hard and brittle before I can use it I believe it is AP that sells the tape with pre punched holes if you send them the bolt spacing I have used it before real nice to work with 
Life is short drink the good wine first

Scott & Heather

Awesome. Thank you so much! I'll be doing this this summer


Sent from my iPhone using Tapatalk Pro
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9