Update photos of our 102C3 project

[sledhead]

with all the spray foam you did why not add 3/4 " tin foil foam board , 1/4 " ply  on top of the bay floor to help keep it warm  ?  it will help a lot

dave

[eagle19952]

Try hooking up an indicator light to tell you when the pump is on - after everything else is done and you are on the road.

yes... a sound activated relay that triggers the air horn ... 

[DoubleEagle]

yes... a sound activated relay that triggers the air horn ... 

Seriously? A simple strobe light would be adequate. 

[dj]

Howdy from central Oregon....Could you possibly give me a call when you can I have a question about that panel forward of your gear indicator (by your left arm when sitting in the seat) I just picked up a 1988 102A3 and they put a alum panel over that and I could use some information on it...Thank you in advance   Doug   541-591-1781

[oltrunt]

DE.  That made me laugh.  I bought ten LED peanut bulbs delivered from China for $2.50.  Consequently, I have 10 Led tell tales aflashing at all times--of course I can't remember which goes with which, but they take hardly any energy at all!   Jack

[Scott & Heather]

Tile
Shower going in and other stuff



Sent from my iPhone using Tapatalk

[Jim Eh.]

Holy Krap. I'm sweating just reading your posts. (Gotta find your tutorial on that shower.) Full speed ahead. We are all cheering for you.

[Scott & Heather]

Thank Jim.

More....tank fittings going in.
Bought a 240 volt dual element 40 gallon water heater that fits in the luggage bay...and swapped out both 240 volt elements and thermostats with 2000 watt 120 volt versions and running two sets of wiring to the two different elements and back to the panel with two separate 20 amp breakers. More shower happenings...



Sent from my iPhone using Tapatalk

[robertglines1]

did I see a Band aide?? Or a badge of builders pride.  You know to keep pictures as you do work so when you get old like me you can refresh your memory. Looks like basic is about done.

[Dave5Cs]

Nice job Scott on the Shower so far. Nice cut job on your drain...
Dave

[brmax]

that might just be the boss doing the cutting!
looks like a great sink in one of the pics

Great work there you all
Floyd

[eagle19952]

oh my...some houses don't have 40 gallon hot water heaters 

[Jim Eh.]

What tank fitting (trade name/brand name) are you installing and where did you get it?

[brmax]

I'm not sure Jim but many fittings can be picked up at Ag supplys stores in my area.
The one I see Scott installing has a Banjo branding made in the middle gods country you all cannot make everything in the great north

What I have been finding lately looking at tank mfg's  is they have a tight web.
As in searching and looking at their sites the contacts and listed locations for themselves are several states is what I'm finding anyhow, so they work very close or are something.

I been saving to favorites many folders in these build interest items

good day
Floyd

[Dave5Cs]

Here Jim Eh checkout all these. Also look up Spin Weld fittings....
Your welcome Dave


https://www.google.com/search?q=holding+tank+fittings&ie=utf-8&oe=utf-8#q=holding+tank+fitting