Control panel

[richardkillmon]

Hello,

I have a MCI 5B that was converted in 1990 and the electric control panel mother board has crashed, Texas Instrument.
There is no replacement so I need to replace with a new system.

I live in south Florida, where is the nearest shop that I can go to?

Thanks

Rick

[gumpy]

Um, MC5s didn't have an electrical control panel with a motherboard.  Whatever  you have, it's aftermarket, so most likely, nobody on this forum will have a clue what you are referring to.

[LuckyChow]

Post a photo of it.  We might can help you after seeing what functions are on it.

[brmax]

Good day there,
who said there isn't a replacement by gosh!.
part #
Does this have a small screen or just a circuit board for operating the ?
curious but need a bit more info

Floyd

[DoubleEagle]

Yes, good clear well focused pictures, inside and out from several angles. You have a mystery box.

[Dave5Cs]

Maybe this will work?
What does the mystery control panel Control? If you say it failed you must know what it was for?
Dave5Cs

[richardkillmon]

The touch screen allowed me to control the temperature in bus, water pumps, lights, generator, etc.
I tried to upload pictures but program said too large, how do I add pictures

[luvrbus]

Replace it with Intellisense panel sounds like you had a early Crestron system

[richardkillmon]

Who can do the work

[Dave5Cs]

You need to resize the pictures here to get them to work. I resize to 60 MB IIRC. Like 400 x 300 HTH
Dave5Cs

[gumpy]

Rick sent me the following photos to shrink and post. Give him time to explain what they are before continuing the discussion and speculation.

[gumpy]

More

[gumpy]

More (what pain in the rear this site is for loading photos!)

[gumpy]

more (beginning to really despise this photo loading process)

[Oonrahnjay]

more (beginning to really despise this photo loading process)

   You're a good, helpful man, Gump.