Eliminating P-Traps
 

Eliminating P-Traps

Started by Scott & Heather, March 23, 2016, 04:56:01 AM

Previous topic - Next topic

Scott & Heather

When we converted our 9, we installed P-traps. They take up precious space in the luggage bays and kitchen cabinets. They sometimes partially empty in the rocking motion of road travel, and they occasionally evaporate if coach isn't used for a week or more. I'd like to eliminate p-traps in my 102 conversion. Trap Guard (Proset) and Sure Seal (RectorSeal) both have solutions. I'm leaning towards Trap Guard. They actually make a version that will fit the 3" toilet opening which would eliminate odors coming up from black tank when flushing etc. Any thoughts?

TrapGuard: https://youtu.be/hARcVg1Edck


Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

eagle19952

Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.

Tikvah

Is it just a flapper type thing?  If so, I'm somewhat suspicious that small particles will begin to collect on the edge with time, and begin to allow gases to escape.  The video shows it working nicely with clean water, but what goes down my drain isn't always clean water.

I'd love to eliminate P-traps, but I'm not convinced.

You do it first, and let us know :)
1989 MCI-102 A3
DD 6V92 Turbo, Alison
Tons of stuff to learn!
Started in Cheboygan, Michigan (near the Mackinaw Bridge).  Now home is anywhere we park
http://dave-amy.com/

scanzel

If you look at the Internet site it states that it is for a floor drain not a replacement for a P-trap.
Steve Canzellarini
Myrtle Beach, SC
1989 Prevost XL

Lin

Sounds like a device like that could be a good idea.
You don't have to believe everything you think.

MB LeMirage

Not for use on a toilet as Scott was wondering. Debris and paper WILL collect at the rim and at the flapper and clog it open. I have seen somebody else try this, resulting in a resounding failure, and a messy, smelly clean up. These have been around for years and years with the old ones made of brass. They only work well on clean water no gravel or sand like most guys are washing down their shop  floors.
Ryan.
Ryan D.
1980 Prevost LeMirage
8v71n 6spd Manual
Ste Genevive M.B.

chessie4905

How about a vent line from the tank to the roof and use this ventfan? Could turn it on when using toilet
You  could reduce the line after fan ant it probably still do the job as long you don't keep it turned on.
http://www.ebay.com/itm/MARINE-3-ELECTRIC-IN-LINE-BLOWER-FOR-BOATS-RVs-12V-ATTWOOD-Turbo-3000/291645489282?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D5bd27350f5554daea23964e1e5bcba21%26pid%3D100338%26rk%3D1%26rkt%3D4%26mehot%3Dpp%26sd%3D182044102457

Course if the suction is too great, you may need to keep a pry bar in the bathroom handy.
GMC h8h 649#028 (4905)
Pennsylvania-central

scott332

I've been using a hepvo waterless trap for my shower for 7-8 years of part time use.  It has not given me any problems at all.  They only come in 1 1/2" so it is not suitable for toilet use. www.hepvo.com
1992 MCI MC-12
1956 GMC PD4501-805

Scott & Heather

TrapGuard isn't a flapper. That's why I'm interested. They claim that the material is teflon slick so nothing will stick in it and cause issues supposedly. It's a memory curled piece of plastic that curls up when not in use. Different design altogether than a flapper.
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

solodon

Scott, it seems to me that if installed in place of the p-traps for sinks, bath, and shower (generally grey water) the Trap Guard would solve your problem.  I'd not install the grate on the top however unless installed directly in the sinks and shower/bath drain.  As for toilet, I don't know what kind you have.  Most RV type are a straight drop and the water above the flapper/ball seals out odors.  If it's like a house unit with a p-trap build in I'd think it not really needed as there is usually water in the bowl that would prevent odors.  I know nothing and give that freely.  Don
Don
1979 MC9
8V71,Automatic.
Indianapolis, IN
Just getting started. Bags are in, interior metal out ready to insulate and cover, then do the floor

chessie4905

The issue he wants to deal with is the tank fumes coming out of the toilet when flushing.Personally, I'd use a roof vent and look how the new job johnnys are designed to keep fumes from coming into the user area when lid is up. I've looked them over and their design works.
GMC h8h 649#028 (4905)
Pennsylvania-central

Tom Y

Not sure about your idea, but what I did was use only 1 trap for shower, kit sink and bath sink. I think it is 1" but could check, and no problems so far.
Tom Yaegle

DoubleEagle

It has potential for grey water alright, but the real problem is handling the toilet pipe. I don't know if they still make it, but there used to be a product called "Stinkerator" which was a low level fan that was in the vent pipe to create a slight vacuum in the system to keep the odors from coming out. I never got around to try it, does anybody use it? 
Walter
Dayton, Ohio
1975 Silvereagle Model 05, 8V71, 4 speed Spicer
1982 Eagle Model 10, 6V92, 5 speed Spicer
1984 Eagle Model 10, 6V92 w/Jacobs, Allison HT740
1994 Eagle Model 15-45, Series 60 w/Jacobs, HT746

Scott & Heather

Good info here. Really like the single trap for everything idea too. A negative pressure from a blank tank vent fan might work too...


Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9