Slobber valves - Page 3
 

Slobber valves

Started by viking1, March 14, 2016, 01:20:03 PM

Previous topic - Next topic

eagle19952

Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.

DoubleEagle

I remember buying an expensive oil sampling kit from Caterpillar in the 1980's with the plastic sampling tubes when I had a trucking company. I was always concerned about the dipstick tube crud that the plastic tube would scrape past that might contaminate the sample, but the cost and added steps swung me to taking samples while the oil was draining hot into a sample bottle (I held it with the tool that takes off wheel nut covers). The main proviso is to let the oil run for a while to flush the bottom sediment out to get a fair reading of the oil that is actually circulating in the engine. Dipping a sample bottle in the catch pan can include the residue of previous oil changes (we tend to not clean the oil pan out to pristine condition), and the bottom layer of the engine oil pan. I think the necessity to do oil analysis in private coaches is less likely to be worthwhile than in heavy trucks that are double or more in weight. Spotting water and antifreeze can be done visually. Fuel contamination can be spotted by dripped a few drops on a paper towel - if a clearer ring appears around the dark oil spot, it is usually diesel fuel.
Walter
Dayton, Ohio
1975 Silvereagle Model 05, 8V71, 4 speed Spicer
1982 Eagle Model 10, 6V92, 5 speed Spicer
1984 Eagle Model 10, 6V92 w/Jacobs, Allison HT740
1994 Eagle Model 15-45, Series 60 w/Jacobs, HT746

luvrbus

Cat has oil sampling ports now for the last 15 or so years I installed a sampling port on my series 60 but I have so many Cat kits I still use the bottles,labels and tubes
Life is short drink the good wine first

Oonrahnjay

Quote from: jackhanow on March 17, 2016, 08:42:21 PM..  coolant that has been exposed to exhaust gets a particularly odd smell i.e. Blown gasket or crack in the combustion surfaces. ...

      First time we were chasing down a coolant problem, my boss in England described the smell "like chicken curry that's been dropped on a stove* burner".  I immediately caught on the first time I smelled it and I've never forgotten the smell.

(In England, they call it the "cooker burner ring" but I translated for you.)
Bruce H; Wallace (near Wilmington) NC
1976 Daimler (British) Double-Decker Bus; 34' long

(New Email -- brucebearnc@ (theGoogle gmail place) .com)

jackhanow

I hate it when I smell that smell. Over the years head gaskets have become one of my least favorite jobs. Oil gets an odd smell as well. it's different between diesel and gas.
don't panic, just fix it before.... 1966 mc5, 1986 102a2