What bulbs to use in Stop/Tail/Directional MCI

Jerry32 · March 12, 2007, 03:30:45 PM

I was trying to find bulb numbers for the tailight and directional andstop lights on a 88 MC 9 / 102a3. The book lists a number fpr each but it is the part number for the whole light assy 24V and when I go to truck light that makes it they don't show the bulb required. I have to go get the bus and drive it home and know there is a light out but don't have it here so I can look and see. Jerry

NJT5047 · March 12, 2007, 03:55:34 PM

Jerry, I don't know about your 102 new square style lights, but an older 9 uses a modular deal that is replaced in total. A "sealed beam" if you will.
Call Luke (or Mike at US Coach) , he'll tell you for certain.
Best, JR

Jerry32 · March 12, 2007, 04:02:34 PM

That might be the case here as the book list numbers for trucklight and when I go to their web and put in the numbers is gives me a description of a rectangular 24V light in each case. I guess then I would have to order from trucklight or??? Jerry

NJT5047 · March 12, 2007, 04:07:19 PM

A phone call will resolve? You probably have modular lights.
Keeps the lens looking good. MC9 lights are cheap...about $9 bucks for a turn or tail light. I had to replace one because the crappy little plug is...well.....crappy. Replace is too easy. Just push or pull and they'll pop right out.
JR

Jerry32 · March 12, 2007, 04:34:40 PM

I just called the local napa store and they say it would have to come from the factory. I will try the web and see if you can order from trucklight. Jerry

Jerry32 · March 12, 2007, 04:45:25 PM

Nobody stock 24V lights so guess I wont be fixing the tailight that is out right away. I thought I might get it going before the 2500 mile tour of the US. Jerry

NJT5047 · March 12, 2007, 04:50:24 PM

Luke stocks them and I'd get it working. The fewer 'issues' that can get you pulled over!
JR

Ednj · March 12, 2007, 05:15:54 PM

My 9 has bulbs P/N 623/24/V6CP.
I have gotten them from Luke as well as NAPA.
I put the same bulbs in the clearance lights.
The tail light bulbs come out in the engine compartment 1/4 turn sockets.

The ones from NAPA are #T624 / 3J

Jerry32 · March 12, 2007, 05:23:25 PM

How do I get a hold of luke??? Jerry

Ednj · March 12, 2007, 05:42:13 PM

Quote from: Jerry32 on March 12, 2007, 05:23:25 PM
How do I get a hold of luke??? Jerry

(856)767-4848 or 1-888-262-2434.