Water pumps, pressure and potential issues? - Page 2
 

Water pumps, pressure and potential issues?

Started by grantgoold, September 01, 2014, 02:47:14 PM

Previous topic - Next topic

Scott & Heather

For some reason our jet pump will spaz out if there isn't an accumulator tank. And actually, it helps with the expansion and contraction of the hot water in the 30 gallon hot water heater onboard. I think that's what it's called too. An expansion tank


Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

Cary and Don

We have had poor experience with Sure-Flo.  We had one of the first Whisper King models.  Almost $300 at the time.  The pressure switch went out and all our water drained out the switch.  Of course, it was just out of warranty although we had actually used it about three months.  Called Sure-Flo for a new switch.  They didn't carry parts any longer.  Too bad.  It seems that the pressure switch was a known problem. They suggested us purchasing one of their newer models.  We got a new pump, but it sure wasn't a Sure-Flo.

Don and Cary
1973 05 Eagle
Neoplan AN340