Directional signal

[Beesme]

I am trying to find a universal switch mine fell into pieces.lol it's on a pd4106 .im trying to wire it with toggle switch and a relay I tried with just toggle switch with 4contacts and have brake and directional switch but don't have brakes unless directionals are on I guess I will need relay so power doesn't back feed to directional relay any help would be awesome . Either with help with wiring  or replacement switch or contact for my switch .. Normally I would just try and find replacement . But we're going on small road trip Friday! Thanx everyone

[Lin]

Is this what you want?

http://www.partdeal.com/truck-lite-turn-signal-switch-in-flat-black-with-7-wire-harness-900.html?zmam=74973193&zmas=1&zmac=4&zmap=77163147&gclid=CI-o4KyDzb0CFZSPfgodLUQADA

[Beesme]

Thank you very much ! That is just what I want. I hope I can have it rushed here tomorrow .

[gus]

You can find these at any auto supply store.

[luvrbus]

Toggles switches works with 4 terminals a 2 terminal switch won't work unless you install a flasher for each side

good luck

[TomC]

That was the Signal Stat model I had on my first truck with the headlight dimmer switch on the floor. Now my present truck has a similar Signal Stat with the high low headlight selector on the end of the turn stock. Your choice. Good Luck, TomC

[Oonrahnjay]

That was the Signal Stat model I had on my first truck with the headlight dimmer switch on the floor. Now my present truck has a similar Signal Stat with the high low headlight selector on the end of the turn stock. Your choice. Good Luck, TomC

    Does this cluster include a horn button/switch mechanism?

[luvrbus]

You can buy those with the cruise,turn, high low beam, four way,wipers and horn all in one a 100 bucks vs 20 bucks,  42 bucks is a little steep buy from Ryder Fleet Truck Parts they are just a little over 20 bucks for the VSM 900 universal model

good luck

[Lin]

Just letting you know, when I posted that link it was merely for reference.  I did not research to check on price.  I assume they are available through parts stores like Napa too.

[luvrbus]

Yea I know that Lin I was just telling him about a better price ? did you get the leak fix yet I hope it was just a seal that was causing the problem

good luck

[Lin]

Clifford, I sent you a PM.

[Beesme]

Thanks everyone .i did get one at napa and installed it . All is well or safe for everyone following behind my bus lol

[gus]

What turn signal switches do that toggles don't is turn off the brake light on the side blinking.

[Jim Eh.]

Follow the wiring instructions included with the turn signal. With a 2 lamp rear system the rear turn signals are bypassed when the brake circuit is energized but not the front ones. If you have a 4 lamp rear system the brake lights are independent from the turn signals. You do need the proper wire count turn signal switch. They come in 4, 5, 7 and 9 wire combinations I believe.