Recommendations for Bendix Tru Flo 750
 

Recommendations for Bendix Tru Flo 750

Started by Zeroclearance, April 06, 2014, 03:14:48 PM

Previous topic - Next topic

Zeroclearance

As a preventative measure 265K I want to either rebuild my compressor or buy a Detroit reman.

The concerns I have are:  I have recently seen two similar Bendix compressors BA-921 on Cats C15 fail shortly after the install.   One was a rod ventilating the housing..   The other was replace after 90 days, it pushed more oil than the original compressor it replaced.

What are you folks' thoughts..

luvrbus

I have had good luck from Brake Service in your neck of the woods I haven't bought one in about 3 years but I never had a failure things maybe different now I don't know 

DD just buys from anyone you never know who rebuilt the compressor depends on who was the cheapest that year

good luck
Life is short drink the good wine first

bevans6

Mine was rebuilt by Bendix.  Not sure if they actually do the work, or farm it out to whoever, but it had a fresh bendix tag on it.

Brian
1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Allison MT-647
Tatamagouche, Nova Scotia

luvrbus

Bendix rebuilds their own they moved from CA to Mexico a few years ago very nice high tech plant they have in Mexico now
Life is short drink the good wine first

twostick

I have a million miles on mine on an N14. Unless it is putting oil in the wet tank I wouldn't worry about it.

Kevin

Zeroclearance

Clifford,  I'll check with Brake Service..    Thanks guys..