Vent above roof, how high?
 

Vent above roof, how high?

Started by Tikvah, August 03, 2013, 09:16:21 AM

Previous topic - Next topic

Tikvah

I'm installing a 1-1/2" black tank vent pipe through my roof today.  How high above the roof should it be?

I suggested to my wife that I could just leave it a few feet up and let the bridges trim it to the proper height....she never trusts me.

Dave
1989 MCI-102 A3
DD 6V92 Turbo, Alison
Tons of stuff to learn!
Started in Cheboygan, Michigan (near the Mackinaw Bridge).  Now home is anywhere we park
http://dave-amy.com/

TomC

Just high enough to put sealant around it, then install a venturi vent over it. Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

gumpy

It's actually more important to choose the proper location than the height. If you install it in the wrong place, the gases can be sucked back into the bus through
vents, roof hatches, rear windows, etc.  BTDT!
Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"

Melbo

If you have other stuff on your roof that might be a consideration.

I ran mine up past the top of everything there -- secured it in place and trimmed it (not using bridges or under passes   ;D ) to be at the same height as the AC's Sat dome etc.

I used a laser level to line up where to cut it.

I have never had any back draft or odor problems.

HTH

Melbo
If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF