MC-8 part numbers
 

MC-8 part numbers

Started by tekebird, April 26, 2013, 01:15:15 PM

Previous topic - Next topic

tekebird

Anyone have a parts book? and would not mind looking up the #'s for tie rod ends and draglink/drag link ends?

thanks in advance

John316

I don't have an 8 book. However, you might try MCI tech support. They should have all the books and are usually very helpful.

FWIW

John
Sold - MCI 1995 DL3. DD S60 with a Allison B500.

tekebird

already went that route...no Joy.

MCI is purging a lot of old stuff.

The part is a  vendor part and I am trying to track down the cross reference numbers so we can go direct to  source but need the MCI number to start.......my manual went with the bus...and is not handy at this time

MC8Mike

I show the drag link end at axle as a 11r-4-4, pitman arm end is a 11r-4-5
cross tube ends are lh 1c-2-62 and the rh end is 1c-2-63
1973 MC8 in progress. 8V92TA, HT740D, Ross Steering. Fallon, Nevada

luvrbus

Most of MCI front end parts are made by Euclid the king pins,tie rods and drag links,Dayton,R&S and Moog are your larger aftermarket suppliers for those parts
Life is short drink the good wine first