8-71N 4 valve head.

[tmathis]

looking for a reputable, reasonable source for a rebuilt head for my Eagle.
I'm in central Texas and would look at a shop to rebuild mine as well.
Anyone out there with a lead?

[luvrbus]

What do you call central Texas ?

[Mex-Busnut]

What do you call central Texas ?

Heaven.

[luvrbus]

I had a set rebuilt in Waco several years ago @ Crankshaft and Valve I have no idea if they are still in business 

[tmathis]

I'm in beautiful Dripping Springs, Texas.
Or as we call it here "Just West of Weird" referring to the unofficial Austin slogan "keep Austin Weird"

[Don Fairchild]

Do you have your off yet and if so are either of them broken. I have several sets in cal but shipping might be ??
try Tejays coach, they might be able to help you.

Don

[tmathis]

Yes I have mine off, I had no/minimal compression on one cylinder. One of the valves has a hole about the size of a pea on one edge. I'll try to post a photo later.
If the seat is not damaged I am considering just dropping one valve in the head and putting it back together. I'd rather have a rebuilt head though. The onlyu guy in my area who'd tackle the job quoted $1,000 to $1,400, and insisted he would not do anything but a complete rebuild.

[tmathis]

Here is what I'm dealing with.

[luvrbus]

Way too much for head rebuild on a 71 or 92 series Baker Machinery in Higley Az charges me 450 each even installs new injector tube they do WW Williams machine work on all DD ? did you lose a injector tip

good luck   

[tmathis]

No it shines like that cause it's just been replaced. I had hoped for a bad injector, a lot easier than pulling that head, no such luck.
Even with shipping, that seems to be a great deal on a rebuild. I'll look them up.
Thanks!

[luvrbus]

Have you tried the places in Houston there lots of places there call Stewart & Stevenson they will refer you to some local that rebuilds head for 900 bucks you can exchange it there

[luvrbus]

What happen on the head Tony you repair it yourself ? Kevin told me you called