Cruise Air problem - Page 2
 

Cruise Air problem

Started by Cary and Don, August 30, 2012, 01:20:55 PM

Previous topic - Next topic

luvrbus

Isn't that relay part of the control board ?
Life is short drink the good wine first

Cary and Don

He said it is screwed on the board and has four wires attached to it.  You just have to take the cover plate off the back of the unit and it is suppose to be right there.  It must be gold plated at that price.  When he said relay we were thinking $25 not $216.

Don and Cary
1973 05 Eagle
GM 4107
Neoplan AN340
1973 05 Eagle
Neoplan AN340

luvrbus

Don, was that price from AAP
Life is short drink the good wine first

rv_safetyman

Don, if you can get a part number, we might be able to cross it at one of the major electronics suppliers.

If it is not soldered to the board (sounds like it is not since it has wires running to it), we might be able to select a different relay that you can run the wires to.

Maybe a photo will help us to figure it out.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/

luvrbus

Nick on the board (mod) sell the units and parts Don maybe he could help out on a price break

good luck
Life is short drink the good wine first

Cary and Don

We are going to be taking off in a couple days.  First trip after bringing the Eagle home. We have had it a year and a half.  Ready for a real trip.  When we get back we plan to pull it out.  The relay is suppose to be screwed on the board.

Don and Cary
1973 05 Eagle
GM 4107
Neoplan AN340 
1973 05 Eagle
Neoplan AN340