What adhesive to use for Soundown composite foam?

[belfert]

My generator enclosure had some composite foam adhered to the inside top of the enclosure.  It came loose and partially melted on the exhaust.  I purchased some Soundown composite foam to replace it.  What is the best adhesive to adhere this to the inside top of the enclosure?

[jjrbus]

Mine was glued and  also held in place with large washers??? for lack of a better word.  JIm

[belfert]

Mine was glued and  also held in place with large washers??? for lack of a better word.  JIm

Probably mechanical fasteners.  The fasteners are attached to the metal with glue of some sort.  I suppose I could use those by grinding off the paint to epoxy the fasteners on.

I'm still wondering what type of adhesive to use.  Some spray adhesives would attack the foam.