I need Engine serial number for series 50 Detroit

[blue_goose]

I am looking for the serial number of a series 50 engine that has a DD 3 programed for jake brake.  All of the ones I have were programed for a retarder.
Even if you have a DD 3 and don't know if it has the jake brake in the program let me have the serial number and I can find out here. If you need a DD programed for a 50 or 60 engine let me know and more than likely you can save a bunch of money.
Jack

[Hard Headed Ken]

Jack,
I don't have what for you ask for, but I might be to help. I have a DDEC III ECM from a Series 50 / V730 with retarder. In the top picture you'll notice that reading the ECM with DRS digital output pins S3 and T3 are grayed out and are not selectable.  I have other software that can activate those grayed out, output pins so you can use them for the Jake low and med outputs, 2nd picture picture. Then use DRS to active the Jake inputs, bottom 2 pictures. PM me or call 615 210 4963 if that's what you need.

[luvrbus]

Here is you a vin number on a Freight liner truck with series 50 375 hp and Jakes put the truck vin number in on the Freightliner site and you can get the engine serial  Vin# 1FUBBZB833DL79155

good luck

[blue_goose]

Thanks for the help so far.  Clifford that truck has been updated to a DD 4.  Keep looking for a DD 3 whith jakes, don't care what HP, just series 50.


thanks
Jack

[luvrbus]

y

[blue_goose]

Didn't understand the Y , but hope it stood for yes.  Kin the DD is on the way back to me on Monday, in the mean time I would like to see the pictures.  Would you email to me at earl1090@verizon.net
Thanks
Jack