4905 door adjustment

bemcadam · April 07, 2012, 08:37:55 PM

Being a newbie to the bus world, and a dummy on top of that, I need to know if anyone out there has ever had to adjust the door on a 4905. Mine needs to come out about a half an inch at the top hinge. Right now, there is about an inch and a half gap at the back with the closer locked. Have not received the maintenance manual yet, so, PLEASE, any help greatly appreciated.

FloridaCliff · April 08, 2012, 05:15:03 AM

Hey,

If no one has posted the information by the time I get home this afternoon, I will scan you a copy.

Cliff

bemcadam · April 08, 2012, 08:27:50 AM

Cliff,
I would like that very much. With the door not closing all the way, it gets a bit drafty in there, what with the Wyoming winds and all, so I want to get that taken care of before going much further on the conversion. I hope to post a pic of the old girl soon, if I can just figure out this darn computer.
Again, Thank you.
Mac

Cary and Don · April 08, 2012, 08:36:04 AM

Does the 4905 have those rubber hinges like the 4107? If so, you might need new hinges. If you go this route, get the steel ones and don't mess with new rubber ones. They are a bear to change and the rubber ones don't last very long.

Don and Cary
1973 05 Eagle
GM 4107
Neoplan AN340

bemcadam · April 08, 2012, 09:28:56 AM

As far as I can tell, they're steel. Should be some way to adjust. Thanx for the reply.
Mac

FloridaCliff · April 08, 2012, 11:21:58 AM

Don,

Mac is talking about the front entrance door.....I think your thinking the baggage doors?

Mac,

Sent an email with the door adjustment page.

Good luck

Cliff

bemcadam · April 08, 2012, 04:37:38 PM

Cliff
Got your e-mail, but the attach. didn't come thru. Don't know what happened
Thanks for the try.
Mac

la chiva · April 09, 2012, 08:29:27 PM

hey guys
i also would like to know how to adjust that door it's the same set up on my 4107

ruthi · April 10, 2012, 05:49:51 AM

I know Ken had to adjust our door a couple of times. If you dont figure it out, let me know, and I will see if Ken can tell ya.

FloridaCliff · April 10, 2012, 01:48:23 PM

Quote from: bemcadam on April 08, 2012, 04:37:38 PM
Cliff
Got your e-mail, but the attach. didn't come thru. Don't know what happened
Thanks for the try.
Mac

I sent it in Works as I figured it comes basic on most computers

What do you have that I can send it in?

Cliff

bemcadam · April 10, 2012, 06:20:35 PM

Cliff
My computer is set up with Microsoft Word and Windows 7.
Also have Powerpoint and Adobe.
Thanks again.
Mac

FloridaCliff · April 10, 2012, 06:58:47 PM

Guy's,

Sent you both the pages as a word document.

Cliff

la chiva · April 10, 2012, 08:26:06 PM

thanks Cliff received your email and attachement

Lachiva

bemcadam · April 11, 2012, 06:14:04 AM

Thank you
Both pages came through as clear as a bell.
Will try to adjust it today if I get the chance
Mac