Need more info on Stemco Hub Covers

[Busted Knuckle]

Much thanks for the links. BK, I might just do that. Just trying to save a few $$$'s

Scott no problem.
FWIW we (I mean us as a company & us a group of busnuts) have found that on common parts readily available & used by other manufactures msny times MCI/Prevost/Setra/Van Hool are often just as cheap or the next place. It's the stuff no one else has or can get that they rape on.
  BK 

[Scott & Heather]

Sorry to be confused about this...but I measured my cover and it's measurements don't match the ebay link measurements. My O.D. edge of flange to edge of flange is 7 inches.

[bobofthenorth]

Usually with places like NAPA if you can wait while they bring your part(s) in with their regular weekly stock order then they won't charge freight. Its only when you want it right now that the freight charge comes on. Usually.

[TomsToy]

Hi Scott,
Try this link for the hub cap, I have a 84 TMC and the part numbers for the hub cap is 343-4080 see page 79. For the individual parts see page 86 the window kit is  359-5999
Good luck

http://www.stemco.com/wp-content/uploads/2011/12/StemcoWheelSeal.pdf

Tom Turner

[Scott & Heather]

Bob, I would think that's true...but according to this guy, I'd have to pay shipping regardless. I told him I could wait a month for these to come in as I'm not leaving for 5 weeks. But no go. I just don't want to throw over $90 at these if I can throw more like $30 at them. But I'm with you, most stores won't charge shipping if you're willing to be patient.

Tom, thanks a bunch for the part numbers. That's what I needed...some good part numbers. And yours matches the number I found on one of my center plugs. Thanks again everyone...