Turn Signal Flashers
 

Turn Signal Flashers

Started by mlh1936, February 15, 2012, 07:03:18 PM

Previous topic - Next topic

mlh1936

I don't have any manuals with me so I ask for your help. Is there a separate flasher for the front and rear signal lights? My 1987 102A-3 right rear and aft side turn signals don't flash. They illuminate steady while the right front signals flash normally. The left side flashes normally front,side and rear. Thanks.
1987 MCI 102A-3, 8V92, HT-740 conversion in progress.

gus

That commonly happens when one of the filaments in a two filament bulb burns out.
PD4107-152
PD4104-1274
Ash Flat, AR

buswarrior

Yup, as noted, carefully check the bulbs and the sockets for shorts.

Many bulb sockets are in sad shape when busnuts inherit them, any slop or corrosion, think hard about replacing them to save future headaches.

Use the dielectric grease or spray of your liking during reassembly, no matter if you clean 'em up or replace 'em.

happy coaching!
buswarrior
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift

mlh1936

1987 MCI 102A-3, 8V92, HT-740 conversion in progress.