body parts for prevos

Larry B · December 22, 2011, 06:28:22 PM

In the southern part of Alberta, Canada EH there is a scrap metal dealer with 4 Le Mirag XL models in his yard. these will some day soon be crushed. There are a lot of good body parts for those looking. He is easy to deal with.

Depewtee · December 22, 2011, 06:55:40 PM

If only I weren't in Florida...

Brian S.

luvrbus · December 22, 2011, 07:15:14 PM

Some lady in Ontario I forgot the town and cannot find my notes when I was looking for parts she had over 50 Prevost she was selling parts from.A good friend I bought a XL for bought a late model front clip and a new bay section from her the price was so good he drove from Phoenix to get the parts the problem is she will not ship and cash only

good luck

scanzel · December 23, 2011, 07:01:17 AM

I clipped a power pole and need a part also. To bad their in Canada, nothing in the USA ? How about Luke anything in their yard in New Jersey ? He did have Prevost once.

robertglines1 · December 23, 2011, 07:17:21 AM

Really got to watch Prevost sheeting they are year sensitive year to year on spacing on ribs. recent experience between a 89 and a 91 XL both seated 40 ft coaches were different. I got door off 91 for Steve and when he got home said ribs did not match, Lucky his old skin top half was good.

Joe Camper · December 23, 2011, 05:49:28 PM

You would be suprised at the replacement costs for new panels they are reasonable. The bay doors skins are split under the rub rail and from there down those skins are small and easy to remove.

Left and right front radius and center (so the entire front) with rivits is under 1000 new from prevo.

luvrbus · December 23, 2011, 05:58:17 PM

Price fiberglass parts for a H series from Prevost those will make you take notice lol

good luck

robertglines1 · December 23, 2011, 06:07:38 PM

Have actually figured out dyes to press ribs into siding. Still have to do one at a time. 60 inch length limit. Still not where I want it but 10 ft away looks like original. Hobby to me ;local sheet metal guy showed me how to build dyes for his press. Just cost of stainless. Bob

buswarrior · December 23, 2011, 09:54:53 PM

Don't forget our friends at IBP industries.

They match everyone's ribbing, old GM, old/new MCI and Prevost.

http://www.ibpindustries.com/

They are busnut friendly and supportive.

happy coaching!
buswarrior

WorkSux · December 25, 2011, 04:48:05 PM

Hi Larry, do You have a number for the buses in Your area?