Allison Transmision Cooler - Page 2
 

Allison Transmision Cooler

Started by jmblake, October 30, 2010, 07:45:14 PM

Previous topic - Next topic

belfert

One of the problems Busted Knuckle has had with water/oil coolers is the cooler leaking internally and coolant getting into the transmission.  He had to rebuild a B500 due to this.

I have considered from time to time if I should replace the oil/water cooler in my bus with a non-water cooled model so I don't lose my B500.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

luvrbus

Belfert, the air to oil cooler is not going to work for you on the B500 iin MN weather cold operating temps are not good for the Allison they need to be around 160 min you will lose that puppy running it cold


good luck
Life is short drink the good wine first

Melbo

My cooler is 30 inches long and 7 inches wide

HTH

Melbo
If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF