Eagle / DD 6V92TA Exhaust Parts Supplier

[CindyandJohn]

Hello all!

I've been out of the loop for quite sometime. Monitoring the board here and there but not daily as in the past.

I was hoping someone could help me locate a supplier for exhaust parts. I need to replace the turbo inlet from the exhaust manifold on the left (driver's) side to the inlet manifold attatched to the turbo (if that makes any sense). It has a 90 degree elbow and a piece of flexible pipe in line. I had to replace the right side and a local service shop had that. I will also need 4 new clamps. As always any assistance will be greatly appreciated.

Thanks,
John

[luvrbus]

John, 380 bucks at Jefferson in OKC.OK for that pipe (450 at DD),your Eagle has a top mounted turbo, for good clamps it will cost around 50 bucks each cheap huh lol


Good luck

[CindyandJohn]

Ouch!

[Don Fairchild]

John;

If you have any trouble finding that pipe I have a supplier close to your area that may have what you need. If not I can get it for you.

Don