tricks to removing factory MCI windows?

[bevans6]

My new Peninsula windows are now here, and before I go out and screw something up, I wanted to ask if there are any tricks to removing the factory top hinged windows from an MC-5C.  The emergency release bars still work, the windows hinge up and down just fine.  Do I just tap our the hinge pin, do I need to cut anything, do they unhook in anyway?

The Pen windows are installed inside the factory frames to replace the OEM glass, basically.

Thanks, Brian

[lostagain]

Brian, if it is anything like the D model, open the window to about +- 45 degree angle, then lift it up and out. Two people make it easier. Take a good look at the hinge first and you'll figure it out. The hinge is shaped like a C, and when openned to the rigth angle, just unhooks.

JC

[bevans6]

That's kinda what I was thinking and hoping!

Thanks, Brian

[Ed Hackenbruch]

We had our 5A done at the factory and i helped. Its been a few years but i think we had to pull/drive out the pins. It does take two to do it.