Eagle Air leak
 

Eagle Air leak

Started by pete81eaglefanasty, February 04, 2010, 02:01:47 PM

Previous topic - Next topic

pete81eaglefanasty

A while back we found an air leak accidentally with me being so hard of hearing my wife standing next to me could hear it, we were refueling at the time.  We were refueling on the left, but the right side was louder.  To make the story short, when we got home my son went under the bus we got shop air going to the bus, he couldn't hardly hear it but by feeling around it he found it was on the s shaped cooler line, it's mounted up under the duel wheels on a steel plate next to the floor, it's a copper tubing that was twisted, in the twist the copper had cracked next to the fitting, so there was no way to fix it so we had to take it out, then we found out way it was twisted was because it wouldn't break free you had to take the whole s line out, it could not be fixed, the trouble was trying to find one.  After we got it off it was in two pieces, see in the attached pictures.  The line comes from the compressor to the s coil (which was broken) to the dryer.  Had trouble finding one, calling all over the country, finally found one and find out that the fitting is silver soldered on.  I just wanted Eagle owners to know about a possible are leak that is hard to find and fix due to the size of the wrenches and where it's at.

                 Pete & Jean
                    FANTASY













WHAT EVER YOU DO, OR TO WHO YOU DO IT TOO, DO IT WITH A SMILE, IT MAKES IT LEGAL THAT WAY.

luvrbus

That is your air compressor cooling loop most of us just do away with it, wasn't that great of an idea to start with and you can move the dryer and use a stright line fwiw



good luck
Life is short drink the good wine first

Dreamscape

Clifford, When did they start using that?

Pete, Glad you found your leak. Maybe you should thank your Wife! ;)

Paul
______________________________________________________

Our coach was originally owned by the Dixie Echoes.

Van

Straight S/S braided line on mine to the dryer. fwiw ;)
B&B CoachWorks
Bus Shop Mafia.
Now in N. Cakalaki

Dreamscape

Quote from: van on February 04, 2010, 06:12:33 PM
Straight S/S braided line on mine to the dryer. fwiw ;)

Mine too, was just wondering when they did that. Maybe they did a few and quit. And there is a big age different between our choaches!
______________________________________________________

Our coach was originally owned by the Dixie Echoes.

luvrbus

Paul,some of the last Brownsville built 05's had the setup but most 10's had it with a few model 15's it was a joke no air could get to it to cool the air so they just moved the dryer. 


good luck
Life is short drink the good wine first

tomhamrick

My 1984 Model 10S has this setup as well.  Clifford, My air dryer is located in the door in front of the radiator with the transmission fill tube.  Where would it have been moved to if the coil was eliminated?
Thanks,
Tom Hamrick
Tom Hamrick
1991 Prevost H3-40 VIP
1981 Eagle 10
Forest City, NC

luvrbus

Tom, when Bendix came out the AD-4 dryer they wanted a long run of tubing away from the compressor for cooling before the dryer so that was Eagle's answer you never know where a AD is going to be on a Eagle I seen them in the engine compartment (like mine) and in the spare tire compartment and points in between


good luck
Life is short drink the good wine first

Prather

On my 72 05 it is just a braided line from the compressor to the dryer which is located in the back drivers side corner of the bus.  Someone in the early 80's (in Texas)  converted my 05  to a 10 which included the caps, wiring, dash and just about everything else.

Prather

john9861

Clifford,
          Mine is in the same spot as Tom's. If I cut out the cooling coil & run straight to the dryer we're talking about 5 ft. Would that be ok?
Thanks, John
John Mellis
Bowman, SC
1982 Eagle Model 10 6V92TA Auto
It's not the years in your life that count. It's the life in your years...

David Anderson

Looks like my metro 10 has that, too, right above the drive shaft between the drive wheels.