bus leveling

[mikke60]

Hi, new here to bulletin board and love the info! My question is about leveling off my Mci 5A at campgrounds. what are the recomended methods? would like to do some type of air or hydraulic. Any help would be great.

Thanks ,Mike

[Ednj]

welcome to the board Mike.

I havent needed any type of leveling system yet.

In the future I might put in a system like what Pete RTS sells.

[robertglines1]

Welcome!!! go up to search area and put in air leveling system...systems are easy and depends on your skills if do it yourself or buy a kit..good luck...

[RTS/Daytona]

Her's what I have for LEVELING SYSTEMS  Pete RTS/Daytona - D.P. SOLUTIONS  

G5-A  CAMPSITE AIR BAG OVERRIDE  LEVELING SYSTEM  &  G5-B MANUAL LEVELING    

G5-A $349 Plus $12 shipping - This system  keeps the OEM Auto Height Control system while traveling - but allows for 3 point Campsite Air Bag Leveling
<> QTY 3 - GAUGE/FILL/BLEED units
<> QTY 3 - AIR BAG CONTROL SOLENOID  (24 volt) Units
<> 120' of PARKER 1/4" D.O.T. Suspension Tubing
<> 100' of 16 gauge 2 conductor Hookup Wire
<> 1 - Manual / Auto level Switch
<> 1 - Suspension Air Connection Manifold
Note: If the solenoid or electrical circuits  fail - the fall back is manual control via the front FILL/BLEED (raise/lower) console - simple as that.
<> Installation Instructions ---> Just splice the  3 AIR BAG CONTROL SOLENOID  units into your existing nylon lines, between your OEM Height Control Valves and your air bags,  run the new 1/4 nylon tubing  and the 2 conductor COMMON solenoid wires up front, connect your suspension supply line & - wire up the MANUAL / AUTO switch and you're done.  


G5-B-$249 Plus $12 shipping For Those that wish to remove their OEM Height Control Valve feature and use the G5 as just the PRIMARY air bag control system -
<> QTY 3 - GAUGE/FILL/BLEED units
<> 120' of PARKER 1/4" D.O.T. Suspension Tubing
<> 1 - Suspension Air Connection Manifold
<> Installation Instructions  --> Remove the OEM OTR Height Control Valves - install the new 1/4 nylon tubing  from your air bags -  run the tubing up front  - & connect your      suspension supply line to the Suspension Air Connection Manifold -  you're done.  

OPTIONAL DEVICES
Option A - Tag Axle Control Solenoid  --- $34
Option B -  4 Point Control  (Not recommended / required-can twist bus frame )  $99
Option B - Suspension Supply Pressure Gauge- $19  

[Sean]

Try the search feature.

Use the one in the tool bar, between "Help" and "Profile," not the box on the right with the Search button, which is not as extensive.

When the search page opens, put in "leveling system" (including the quotes) in the "Search For:" box.  You will get five full pages of results.  (I would post a direct link here, but the way this board works, there are no direct URLs for search results.)  Read through them all -- probably every possible way to level your coach has been discussed in there someplace.

-Sean
http://OurOdyssey.BlogSpot.com

[busshawg]

Welcome to the madness

Grant

[johns4104s]

Yes, Mikke welcome to the best hobby in the world, Boy does it have its lows and highs.

John

PS Keep your eye on the temperature gauge and change those fuel filters.