8V92 leaking oil - Page 3
 

8V92 leaking oil

Started by paul102a3, August 02, 2009, 02:17:40 PM

Previous topic - Next topic

luvrbus

Steve, if you don't replace the inner cone and seal you are wasting your time and money.
Me with 8v92 engines with a harmonic balancer I replace both the inner and outer just my way of doing it.   
good luck
Life is short drink the good wine first

paul102a3

Steve 5B,

The seal was itself was 18.21, the cone was 63.76, and the o-ring seal that goes inside the cone was 6.65.

Paul

paul102a3

Luvrbus's reply came in while I was typing and I would agree 100%

When the seal in my engine was relaced 6 years ago, they did NOT replace the cone and I can see the different wear marks from the different seals.

Paul

luvrbus

You can beat the 63 dollar price on the cone they are about 30 dollars for both from PC Industries or Don Fairchild here on the board McBee and Federal both have the aftermarket cone and seal  
good luck
Life is short drink the good wine first

niles500

Paul - How much  for the wheel polish @ Wildwood ? - sorry for the hijack
(\__/)
(='.'=)
(")_(")  

- Niles

paul102a3

Niles,

$15.00 paid at the truckwash to acid wash the wheels and $10.00 (if you pay cash and don't want a receipt) per wheel to machine polish and then follow through with hand polish.

Best $75 I have ever spent as far as appearance is concerned. I could not get over how good the wheels looked after the acid wash. It removed 90% of the junk/gunk and I almost skipped the machine polishing.

There are four shops that do wheels at the Wildwood exit. If your interested, make sure you go to JP. His crew does the best work and he makes his own cleaner polish which I have used on the stainless and does a real nice job. The polish is sold across the street at I-75 chrome as well.

Paul

The wheels look brand new

niles500

Paul, thanks for the info - when heading west from I75 is JP on the left (south) side of the road or right (north) side? - One more question - Did you only have 3 wheels done? shouldn't it be $150 for 6 wheels? 15+10x6=150

I'll be heading up there this week and definitely need a clean/polish - thanks again
(\__/)
(='.'=)
(")_(")  

- Niles

Busted Knuckle

Quote from: niles500
Paul, thanks for the info - when heading west from I75 is JP on the left (south) side of the road or right (north) side? - One more question - Did you only have 3 wheels done? shouldn't it be $150 for 6 wheels? 15+10x6=150

I'll be heading up there this week and definitely need a clean/polish - thanks again

Niles I think it is more like $15.00 for all 6 wheels at the truck wash and  $10.00 each X 6=$60 @ the polish shop! =$75

And wow is JP still doing wheels after all these yrs? (If it is the same JP over on the south west side near the chrome shop used to polish wheels way back when I had trks!)
;D  BK  ;D
Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

niles500

Doh  ???

Thanks Bryce, had a brain freeze there  ::)
(\__/)
(='.'=)
(")_(")  

- Niles

paul102a3

Sorry for the confusion on the price. The $15 was to wash all the wheels and $60 to polish.

JP is located behind the truckwash on the north side as you head west. The entrance is between the TA truck stop and the KFC.

Bryce, JP was at a truck show in Texas but it was his crew that did my wheels.

Paul


Busted Knuckle

Quote from: paul102a3 on August 18, 2009, 08:27:07 PM
Sorry for the confusion on the price. The $15 was to wash all the wheels and $60 to polish.

JP is located behind the truckwash on the north side as you head west. The entrance is between the TA truck stop and the KFC.

Bryce, JP was at a truck show in Texas but it was his crew that did my wheels.

Paul



Probably the same JP, and yes he was at that location once before when I was trucking. But when they opened up the chrome shop he was working in the lot next door to them for a while. Is the CB shop still there behind the truck wash too or does JP have that for an office/shop?
Just curious. ;D  BK  ;D
Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

paul102a3

JP has his location at the east end of the building. Right next door is another outfit that does wheels and the rest of the building seems empty.

Someone else has the location next to the chrome shop. Interestingly, the folks that run the chrome shop don't suggest using them and send people across the street to JP.

Paul

niles500

Paul - Your fine, the only confused one was me - thanks again for the info
(\__/)
(='.'=)
(")_(")  

- Niles

bigred

Paul ;You were hit with the charges as listed in the flat rate manual.A blind man can do repairs in the length of time the Flat Rate Manual allows.When I am ordering repairs,I alwas ask if they are charging by the flat rate manuel.If the answer is yes ,then I move on down the list.These so called flat rates are highway robbery in my opinion!
;
Rhet Raby           137 Elk Mtn Rd       Asheville N c 28804             1993 Prevost XL